PCB-Ruler
wirenux·PCB-Ruler
About the PCB-Ruler
PCB-Ruler is an open source PCB design by wirenux, published on GitHub under the MIT license. It is a 2-layer board measuring 155 × 35 mm, with 38 components from 20 distinct parts.
Other key parts include the 74HC193, 74HC00, 74HC86 and 74HC08D. By type, the board carries 11 resistors, 8 switches, 7 diodes, 6 capacitors, 5 ICs and 1 battery holder.
From the project
A functional 15cm ruler featuring an embedded 4-bit binary counter and a multi-gate logic circuit. Designed in KiCad.
A functional 15cm ruler featuring an embedded 4-bit binary counter and a multi-gate logic circuit. Designed in KiCad.
This project is release under the MIT License

Main components on the PCB-Ruler
PCB-Ruler bill of materials (BOM)
38 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC193 | DIP-16_W7.62mm | U1 |
| 1 | 74HC00 | DIP-14_W7.62mm | U2 |
| 1 | 74HC86 | DIP-14_W7.62mm | U3 |
| 1 | 74HC08D Nexperia | SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL | U4 |
| 1 | 74HC00 | SSOP-16_5.3x6.2mm_P0.65mm | U5 |
| 1 | Battery_Cell | BatteryHolder_Multicomp_BC-2001_1x2032 | BT1 |
| 1 | Power | SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | Binary | SW_SPDT_CK_JS102011SAQN | SW2 |
| 1 | Gate | SW_SPDT_CK_JS102011SAQN | SW3 |
| 1 | Plus | SW_Push_1P1T_XKB_TS-1187A | SW5 |
| 1 | Minus | SW_Push_1P1T_XKB_TS-1187A | SW6 |
| 1 | A | SW_Push_1P1T_XKB_TS-1187A | SW7 |
| 1 | B | SW_Push_1P1T_XKB_TS-1187A | SW8 |
| 1 | SW_DIP_x05_Gate | SW_DIP_SPSTx05_Slide_6.7x14.26mm_W6.73mm_P2.54mm_LowProfile_JPin | SW9 |
| 4 | Green Hubei KENTO Elec | D_0805 | D1, D2, D3, D4 |
| 2 | Yellow Hubei KENTO Elec | D_0805 | D5, D6 |
| 1 | Red Foshan NationStar Optoelectronics | D_0805 | D7 |
| 6 | 100nF YAGEO | C_0805 | C1, C2, C3, C4, C5, C6 |
| 7 | 300Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R1, R2, R3, R4, R5, R6, R7 |
| 4 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R8, R9, R10, R11 |
PCB-Ruler design files
The KiCad project lives in the wirenux/PCB-Ruler repository on GitHub; these links point at the commit this page was built from.
- LayoutRuler.kicad_pcb
- SchematicRuler.kicad_sch
PCB-Ruler: common questions
How big is the PCB-Ruler?
The PCB-Ruler measures 155 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB-Ruler?
38 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB-Ruler design files?
From the wirenux/PCB-Ruler repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB-Ruler design in my own project?
Yes, under the terms of its MIT license, which wirenux chose for the repository.