21 open source boards using the 74HC193
Real designs built with the 74HC193, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Minimal-64x4-Home-Computer
slu4coder
245.1 × 160 mm134 parts2LNo license3238-Bit CPU 32k
slu4coder
196.9 × 125.1 mm101 parts2LNo license184Minimal-64-Home-Computer
slu4coder
306.1 × 130.2 mm127 parts2LNo license93AVR/Arduino
Minimal-UART-Computer-3
slu4coder
208.9 × 170.8 mm202 parts2LNo license4374HCT6526 Board 3
dmolinagarcia
100 × 100 mm89 parts4LNo license14CFT Processor Board 0
alexiosc
233.4 × 280 mm274 parts2LGPL-3.06Clock
ifilot
101.6 × 55.9 mm72 parts2LCERN-OHL-S-2.02PIC
Homebrew 65c02 Computer
snorklerjoe
127.6 × 98 mm252 parts4LMIT1Main Board
juniperlynx
212 × 126 mm75 parts2LNo license1Minimal-UART-Computer
slowcorners
191.8 × 121.3 mm109 parts2LNo license0Minimal-UART-CPU-Dev
slowcorners
180.3 × 112.4 mm89 parts2LNo license0Minimal-UART-CPU-FLASH-Edition
tlhconsulting
177.2 × 114.3 mm81 parts2LNo license0PCB-Ruler
wirenux
155 × 35 mm38 parts2LMIT074HCT6526 Board 4
dmolinagarcia
100 × 100 mm76 parts4LNo license14CFT Board 1
alexiosc
233.4 × 280 mm222 parts2LGPL-3.0674HCT6526 Board 2
dmolinagarcia
100 × 100 mm64 parts4LNo license1474HCT6526 Board 1
dmolinagarcia
100 × 100 mm62 parts4LNo license14Pc
draklowell
100 × 99.5 mm17 parts2LGPL-3.03Hdctl 01
sim82
101.6 × 70.1 mm23 parts4LMIT1Old step counter
draklowell
100 × 99.5 mm16 parts2LGPL-3.03Step counter
draklowell
100 × 99.5 mm16 parts2LGPL-3.03
How designs wire the 74HC193
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the 74HC193 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 12 of 15 designs, most often 100 nF (then 10 µF).
- The CLR pin is tied to GND on 12 of 15 designs (a signal on 3).
- The CO pin is left unconnected on 11 of 15 designs (a signal on 4).
- The QB pin is left unconnected on 10 of 15 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| QBpin 2 | Connected to: Not connected 67% · a signal 33% | — |
| QApin 3 | Connected to: Not connected 67% · a signal 33% | — |
| UPpin 5 | Connected to: 5V 60% · a signal 40% | — |
| QCpin 6 | Connected to: Not connected 67% · a signal 33% | — |
| QDpin 7 | Connected to: Not connected 60% · a signal 40% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| COpin 12 | Connected to: Not connected 73% · a signal 27% | — |
| CLRpin 14 | Connected to: GND 80% · a signal 20% | — |
| VCCpin 16 | Connected to: 5V 93% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minimal-64x4-Home-Computer by slu4coder, 8-Bit CPU 32k by slu4coder, Minimal-64-Home-Computer by slu4coder and Minimal-UART-Computer-3 by slu4coder.
The 74HC193 in open source designs
The gallery holds 21 open source boards using the 74HC193 from 15 GitHub repositories; a typical one measures about 155 × 100 mm and carries around 81 components.
71% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Minimal-64x4-Home-Computer by slu4coder.
Parts used alongside the 74HC193
Microcontrollers on boards using the 74HC193
What boards using the 74HC193 are built for
74HC193: common questions
Where can I find a 74HC193 reference design?
Each of the 21 boards on this page is a real design using the 74HC193. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC193 VCC pin?
The VCC pin has a decoupling capacitor on 12 of 15 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 15 open source designs using the 74HC193.
How is the 74HC193 CLR pin connected?
The CLR pin is tied to GND on 12 of 15 designs (a signal on 3). Counted from the KiCad layouts of 15 open source designs using the 74HC193.
How is the 74HC193 CO pin connected?
The CO pin is left unconnected on 11 of 15 designs (a signal on 4). Counted from the KiCad layouts of 15 open source designs using the 74HC193.
What parts are used alongside the 74HC193?
The 74HC00, 74HC245, 74HC86, 74HC04 and 74HC02 appear in the most repositories here.
Which microcontrollers do boards using the 74HC193 use?
Most are built on AVR/Arduino (1) and PIC (1).
How big is a typical board using the 74HC193?
The median is 155 × 100 mm, and 71% are two-layer designs.
What is the most popular open source board using the 74HC193?
By GitHub stars, Minimal-64x4-Home-Computer by slu4coder, with 323 stars.
Can I simulate one of these boards using the 74HC193 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.