Echo10

wmans01·Echo10·PCB/Echo10.kicad_pcb

Echo10 PCB layout, top view — open source RP2040/RP2350 board by wmans01

About the Echo10 PCB

Echo10 is an open source RP2040/RP2350 PCB design by wmans01, published on GitHub. It is a 2-layer board measuring 59.1 × 77.2 mm, with 12 components from 2 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 11 switches and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

Design Files for the Echo 10% Macropad

The case also has an 8 degree incline for ergonomics

I used MX_V2 for the keyswitch footprints. In retrospect, adding feedback through a display or LED might have been more effective. I also could have been more fancy with the designs on the silkscreen.

Echo10, from the project README
From the project README

Main components on the Echo10

Echo10 bill of materials (BOM)

12 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
11
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +3

Echo10 design files

The KiCad project lives in the wmans01/Echo10 repository on GitHub; these links point at the commit this page was built from.

Echo10: common questions

What microcontroller does the Echo10 use?

The Echo10 is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Echo10 PCB?

The Echo10 measures 59.1 × 77.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Echo10?

12 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Echo10 design files?

From the wmans01/Echo10 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Echo10 design in my own project?

The repository has no license, so all rights stay with wmans01. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Echo10 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards