Datalogger
wngandu·datalogger-pcb
About the Datalogger PCB
Datalogger is an open source STM32 PCB design by wngandu, published on GitHub. It is a 6-layer board measuring 20 × 12 mm, with 65 components from 34 distinct parts.
Its main chip is the STM32L4P5CGU6, from the STM32 family. Other key parts include the TMP112AIDRLR, BQ25180YBGR, LIS2DH12TR and TPS22916CLYFPT. By type, the board carries 23 capacitors, 19 resistors, 5 ICs, 5 connectors, 5 inductors and 4 diodes.
It belongs with the power & battery and sensors designs in this gallery.
From the project
KiCad hardware design for the Datalogger V4 REV2 board
KiCad hardware design for the Datalogger board: schematic, PCB layout, footprint/symbol libraries and fabrication outputs.
This board is one of three parts of the Datalogger project:
The USB comm protocol between the firmware on this board and the desktop app is documented in asserts/DataLoggerComm Frame Format.xlsx` (same spec lives in both other repos).
Full symbol/footprint libraries for these parts are under LIB/.

Main components on the Datalogger
Datalogger bill of materials (BOM)
65 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TMP112AIDRLR | SOTFL50P160X60-6N | IC1 |
| 1 | BQ25180YBGR | BGA8C40P2X4_100X155X50 | IC2 |
| 1 | STM32L4P5CGU6 | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | LIS2DH12TR | LGA-12_STM-M | U3 |
| 1 | TPS22916CLYFPT | BGA4C40P2X2_77X77X50 | U4 |
| 1 | LMUN2211LT1G | SOT-23 | Q2 |
| 1 | 16MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 100nFx4 | CA0508KRX7R7BB104 | CN1 |
| 1 | Conn_02x05_Odd_Even | PinSocket_2x05_P1.27mm_Vertical | J1 |
| 1 | Conn_01x12_Pin | PinHeader_1x12_P1.27mm_Vertical | J3 |
| 1 | Conn_01x12_Socket | PinHeader_1x12_P1.27mm_Vertical | J4 |
| 1 | Conn_02x09_Odd_Even | PinHeader_2x09_P1.27mm_Vertical | J12 |
| 1 | DLW21HN900SQ2L Murata | DLW21HN121HQ2B | FL1 |
| 1 | TPS630252YFFR Texas Instruments | BGA20C40P4X5_177X209X62 | PS1 |
| 3 | RB161QS-40T18R | RB161QS40T18R | D1, D3, D5 |
| 1 | USBULC6-2M6 | SON50P100X145X60-6N-D | D4 |
| 2 | 600R 1A TDK | L_0603_1608Metric | L1, L4 |
| 2 | 120R 2A Wurth Electronics | L_0603_1608Metric | L2, L3 |
| 1 | 1uH | IND_TAIYO_NR3012_TAY | L6 |
| 9 | 10uF | C_0402_1005Metric | C1, C2, C3, C17, C24, C26, C28, C29 +1 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | 100nF | C_0402_1005Metric | C4, C8, C9, C11, C12, C13, C15, C16 +2 |
| 2 | 10pF | C_0402_1005Metric | C21, C25 |
| 2 | 1uF | C_0402_1005Metric | C33, C35 |
| 2 | 1M | R_0402_1005Metric | R1, R17 |
| 3 | 10k UNI-ROYAL | R_0402_1005Metric | R2, R3, R4 |
| 1 | 100 | R_0402_1005Metric | R7 |
| 1 | WR02X103JAL 1k | R_0402_1005Metric | R8 |
| 2 | 300k | R_0402_1005Metric | R19, R22 |
| 2 | 100k | R_0402_1005Metric | R20, R21 |
| 2 | 15k | R_0402_1005Metric | R26, R27 |
| 2 | WR02X103JAL 10k UNI-ROYAL | R_0402_1005Metric | R33, R34 |
| 2 | 3.3k | R_Array_Convex_2x0402 | RN1, RN2 |
| 1 | 1M | R_Array_Convex_2x0402 | RN3 |
| 1 | 10k | R_Array_Convex_4x0402 | RN4 |
Datalogger design files
The KiCad project lives in the wngandu/datalogger-pcb repository on GitHub; these links point at the commit this page was built from.
- LayoutDatalogger_V4_REV2.kicad_pcb
- SchematicDatalogger_V4_REV2.kicad_sch
Datalogger: common questions
What microcontroller does the Datalogger use?
The Datalogger is built around the STM32L4P5CGU6, from the STM32 family.
How big is the Datalogger PCB?
The Datalogger measures 20 × 12 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Datalogger?
65 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the Datalogger design files?
From the wngandu/datalogger-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Datalogger design in my own project?
The repository has no license, so all rights stay with wngandu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Datalogger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k