11 open source boards using the TMP112AIDRLR

Real designs built with the TMP112AIDRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TMP112AIDRLR

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TMP112AIDRLR connects to, and the resistors, capacitors and other passives placed on it.

  • The V+_5 pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 10 nF).
  • The SCL_1 pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 1.5 kΩ).
  • The SDA_6 pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 1.5 kΩ).
  • The ADD0_4 pin is tied to GND on 8 of 9 designs.
SCL_1pin 1Connected to: The microcontroller 78%, a connector 56%, INA226AIDGSR 33%
  • Pull-up to 3.3V on 78% · 4.7 kΩ (5), 1.5 kΩ (1), 2.2 kΩ (1)
GND_2pin 2Connected to: GND 100%
ALERT_3pin 3Connected to: The microcontroller 33% · not connected 33%
  • Pull-up to 3.3V on 44% · 4.7 kΩ (4)
ADD0_4pin 4Connected to: GND 89%
V+_5pin 5Connected to: 3.3V 78% · a signal 22%
  • Decoupling capacitor on 100% · 100 nF (13), 10 nF (2), 10 µF (2)
SDA_6pin 6Connected to: The microcontroller 78%, a connector 56%, INA226AIDGSR 33%
  • Pull-up to 3.3V on 78% · 4.7 kΩ (5), 1.5 kΩ (1), 2.2 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TET-Module by ICDT-Inatel-Cubesat-Design-Team, LIONv3-R by RodrigoCAndrade, LIONv3-Mini by RodrigoCAndrade and Pico power board by ProjectLighthouseCAU.

The TMP112AIDRLR in open source designs

The gallery holds 11 open source boards using the TMP112AIDRLR from 10 GitHub repositories; a typical one measures about 119 × 92 mm and carries around 79 components.

55% use four copper layers or more, and 36% carry an open source license.

The most starred is TET-Module by ICDT-Inatel-Cubesat-Design-Team.

Microcontrollers on boards using the TMP112AIDRLR

TMP112AIDRLR: common questions

Where can I find a TMP112AIDRLR reference design?

Each of the 11 boards on this page is a real design using the TMP112AIDRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TMP112AIDRLR V+_5 pin?

The V+_5 pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the TMP112AIDRLR.

What pull-up resistor is used on the TMP112AIDRLR SCL_1 pin?

The SCL_1 pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 1.5 kΩ). Counted from the KiCad layouts of 9 open source designs using the TMP112AIDRLR.

What pull-up resistor is used on the TMP112AIDRLR SDA_6 pin?

The SDA_6 pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 1.5 kΩ). Counted from the KiCad layouts of 9 open source designs using the TMP112AIDRLR.

What parts are used alongside the TMP112AIDRLR?

The E80-900M2213S, INA226AIDGSR, TCAN3414DR, USBLC6-2SC6 and ESP32-C6-MINI-1-N4 appear in the most repositories here.

Which microcontrollers do boards using the TMP112AIDRLR use?

Most are built on ESP32 (4), STM32 (4) and RP2040/RP2350 (1).

How big is a typical board using the TMP112AIDRLR?

The median is 119 × 92 mm, and 45% are two-layer designs.

What is the most popular open source board using the TMP112AIDRLR?

By GitHub stars, TET-Module by ICDT-Inatel-Cubesat-Design-Team, with 5 stars.

Can I simulate one of these boards using the TMP112AIDRLR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part