17 open source boards using the LIS2DH12TR
Real designs built with the LIS2DH12TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Badge-2025
endsummercamp
8.8 × 11.7 mm105 parts2LNo license9Badge
aramcon-badge
85 × 99.6 mm85 parts2LNo license6Nordic nRF
Drake
Reisi
47.9 × 47.9 mm160 parts4LBSD-2-Clause1PRODIGY-MOTHERBOARD
mark69163
160 × 120 mm333 parts4LNo license0ESP32
Airgradient-GO
Open-Air-Foundation
62.9 × 87 mm141 parts4LCC-BY-SA-4.00Nordic nRF
Nrf9151-tracker
chgpalmer
50.8 × 22.9 mm96 parts4LNo license0ESP32
Wireslesslock
Shehroz30
50 × 50 mm67 parts4LMIT0STM32
Datalogger
wngandu
20 × 12 mm65 parts6LNo license0ESP32
Hush main
Terryzhao-dev
64 × 64 mm52 parts4LNo license0ESP32
Home health care
nguyen-van-phuong-19
50 × 41.3 mm49 parts4LNo license0Nordic nRF
RoomSensor
mbush91
40.6 × 22.3 mm26 parts2LNo license0Dml21m
jonnor
42 × 14.2 mm28 parts2LNo license315Badge2
aramcon-badge
3.3 × 20.3 mm71 parts2LNo license6STM32
Trace reaper
jayis1
85.5 × 24 mm24 parts4LNo license3Hellen1-72
rusefi
154 × 159 mm126 parts2LNo license0Dml20m
jonnor
40 × 20 mm27 parts2LNo license315STM32
ACOUSTIC-PHANTOM — Acoustic Side-Channel Analyzer
jayis1
120 × 22 mm20 parts4LNo license3
How designs wire the LIS2DH12TR
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the LIS2DH12TR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 10 µF).
- The VDD_IO pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 10 µF).
- The RES pin is tied to GND on 12 of 13 designs.
- The INT2 pin is left unconnected on 9 of 14 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCL/SPCpin 1 | Connected to: The microcontroller 57%, a connector 50% |
|
| CSpin 2 | Connected to: 3.3V 62% · a signal 31% | — |
| SDA/SDI/SDOpin 4 | Connected to: The microcontroller 64%, a connector 43% |
|
| RESpin 5 | Connected to: GND 92% | — |
| GNDpin 6, 7, 8 | Connected to: GND 93% | — |
| VDDpin 9 | Connected to: 3.3V 77% · a signal 15% |
|
| VDD_IOpin 10 | Connected to: 3.3V 77% · a signal 23% |
|
| INT2pin 11 | Connected to: Not connected 64% · a signal 29% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dml20m by jonnor, Badge-2025 by endsummercamp, Badge by aramcon-badge and ACOUSTIC-PHANTOM — Acoustic Side-Channel Analyzer by jayis1.
The LIS2DH12TR in open source designs
The gallery holds 17 open source boards using the LIS2DH12TR from 14 GitHub repositories; a typical one measures about 50 × 24 mm and carries around 67 components.
59% use four copper layers or more, and 18% carry an open source license.
The most starred is Dml21m by jonnor.
Parts used alongside the LIS2DH12TR
Microcontrollers on boards using the LIS2DH12TR
What boards using the LIS2DH12TR are built for
LIS2DH12TR: common questions
Where can I find a LIS2DH12TR reference design?
Each of the 17 boards on this page is a real design using the LIS2DH12TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LIS2DH12TR VDD pin?
The VDD pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the LIS2DH12TR.
What decoupling capacitors do designs use on the LIS2DH12TR VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the LIS2DH12TR.
How is the LIS2DH12TR RES pin connected?
The RES pin is tied to GND on 12 of 13 designs. Counted from the KiCad layouts of 14 open source designs using the LIS2DH12TR.
Which microcontrollers do boards using the LIS2DH12TR use?
Most are built on ESP32 (5), Nordic nRF (3) and STM32 (3).
How big is a typical board using the LIS2DH12TR?
The median is 50 × 24 mm, and 41% are two-layer designs.
What is the most popular open source board using the LIS2DH12TR?
By GitHub stars, Dml21m by jonnor, with 315 stars.
Can I simulate one of these boards using the LIS2DH12TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.