ErgoGain
Won-CCS·ErgoGain·kicad/ergo_gain_r/ergo_gain_r.kicad_pcb
About the ErgoGain PCB
ErgoGain is an open source RP2040/RP2350 PCB design by Won-CCS, published on GitHub under the MIT license. It is a 2-layer board measuring 136.2 × 92.3 mm, with 44 components from 5 distinct parts.
Its main chip is the RP2040-ZERO, from the RP2040/RP2350 family. By type, the board carries 20 switches, 20 diodes, 3 connectors and 1 IC.
From the project
cd firmware qmk compile -kb ergogain -km default
Main components on the ErgoGain
ErgoGain bill of materials (BOM)
44 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040-ZERO RP2040-Zero | RP2040-Zero-THT | U2 |
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | PinSocket_2x04_P2.54mm_Vertical | J1 |
| 2 | AUDIOJACK4 AudioJack4 | TRRS_PJ-320A | J2, J3 |
| 20 | SW_Push | MX_socket | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +12 |
| 20 | C81598 D | 1N4148W | D1, D2, D3, D4, D5, D6, D7, D8 +12 |
ErgoGain design files
The KiCad project lives in the Won-CCS/ErgoGain repository on GitHub; these links point at the commit this page was built from.
ErgoGain: common questions
What microcontroller does the ErgoGain use?
The ErgoGain is built around the RP2040-ZERO, from the RP2040/RP2350 family.
How big is the ErgoGain PCB?
The ErgoGain measures 136.2 × 92.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ErgoGain?
44 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ErgoGain design files?
From the Won-CCS/ErgoGain repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ErgoGain design in my own project?
Yes, under the terms of its MIT license, which Won-CCS chose for the repository.
Can I test firmware for the ErgoGain without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k