HardLabs

Thotcon0x5

Workshop88·thotcon0x5·hardware/development/iss_p1/thotcon_0x5.net

This repository ships a schematic but no board layout.
Simulate this board

About the Thotcon0x5 PCB

Thotcon0x5 is an open source AVR/Arduino PCB design by Workshop88, published on GitHub. It is a board, with 69 components from 39 distinct parts.

Its main chip is the ATMEGA32U4, from the AVR/Arduino family. Other key parts include the 5V, 3.3V and MC14050. By type, the board carries 20 capacitors, 15 resistors, 7 connectors, 7 switches, 4 ICs and 4 diodes.

From the project

Basics: Replace ARDUINOROOT/hardware/arduino/variants/leonardo/pinsarduino.h with libraries/pinsarduino.h (back up the existing one) Replace ARDUINOROOT/hardware/arduino/boards.txt with the one from this repo. * To program via USB, you need the actual Leonardo or LilyPadUSB bootl

Basics: Replace ARDUINOROOT/hardware/arduino/variants/leonardo/pinsarduino.h with libraries/pinsarduino.h (back up the existing one) Replace ARDUINOROOT/hardware/arduino/boards.txt with the one from this repo. * To program via USB, you need the actual Leonardo or LilyPadUSB bootloader. To install that, you'll need to use some kind of AVRISP. This is a good place to start: http://letsmakerobots.com/content/make-arduino-isp-programmer

Main components on the Thotcon0x5

ATMEGA32U45V3.3VMC14050

Thotcon0x5 bill of materials (BOM)

69 components, 39 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA32U4
U1
1
5V
U2
1
3.3V
U3
1
MC14050
U4
1
8.000 MHz
Y1
1
POWER
J1
1
ANALOG
J2
1
DIGITAL_0
J3
1
DIGITAL_1
J4
1
EXT_POWER
J5
1
USB_IN
J6
1
ICSP
P2
2
CR2032
B1, B2
1
EA_DOGS102
DS1
1
.5 A
F1
4
TOOLING
MH1, MH2, MH3, MH4
1
A
S1
1
B
S2
1
RST
S3
1
UP
S4
Show 19 more
QtyPartRefs
1
RGT
S5
1
DWN
S6
1
LFT
S7
2
300
Z1, Z2
1
BATTERY
DS2
3
MBR0530
D2, D4, D5
1
S01575
D6
2
10 uF
C1, C10
6
1 uF
C2, C9, C11, C14, C15, C16
3
4.7 uF
C3, C5, C7
2
.01 uF
C4, C6
5
.1 uF
C8, C17, C18, C19, C20
2
18 pF
C12, C13
1
1K
R1
2
5V
R2, R3
2
22
R4, R5
2
120
R6, R16
7
10K
R7, R8, R9, R10, R11, R12, R13
1
2.2K
R14

Thotcon0x5 design files

The KiCad project lives in the Workshop88/thotcon0x5 repository on GitHub; these links point at the commit this page was built from.

Thotcon0x5: common questions

What microcontroller does the Thotcon0x5 use?

The Thotcon0x5 is built around the ATMEGA32U4, from the AVR/Arduino family.

How many components are on the Thotcon0x5?

69 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Thotcon0x5 design files?

From the Workshop88/thotcon0x5 repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.

Can I use the Thotcon0x5 design in my own project?

The repository has no license, so all rights stay with Workshop88. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Thotcon0x5 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards