Board 17
WPISmartmouse·board_17
About the Board 17
Board 17 is an open source NXP PCB design by WPISmartmouse, published on GitHub. It is a 2-layer board measuring 70.5 × 42.6 mm, with 45 components from 13 distinct parts.
Its main chip is the Teensy3.6, from the NXP family. Other key parts include the drv8833 and tps82130. By type, the board carries 13 connectors, 10 resistors, 9 capacitors, 8 diodes, 3 ICs and 2 switches.
Main components on the Board 17
Board 17 bill of materials (BOM)
45 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy3.6 | Teensy35_36_reset | U1 |
| 1 | drv8833 | drv8833 | U2 |
| 1 | tps82130 | tps82130 | U3 |
| 7 | CONN_01X03 | Pin_Header_Straight_1x03_Pitch2.54mm | J0, J1, J2, J3, J4, J5, J6 |
| 3 | CONN_01X02 | Pin_Header_Straight_1x02_Pitch2.54mm | J7, J8, J11 |
| 2 | CONN_01X04 | Pin_Header_Straight_1x04_Pitch2.54mm | J9, J10 |
| 1 | CONN_02X04 | Pin_Header_Straight_2x04_Pitch2.54mm | J12 |
| 2 | MX1A | MX1A | S0, S1 |
| 8 | LED | LED_0805 | D0, D1, D2, D3, D4, D5, D6, D7 |
| 9 | C10uF | C_0805 | C0, C1, C2, C3, C4, C5, C6, C7 +1 |
| 1 | R78.7K | R_0805 | R0 |
| 1 | R15K | R_0805 | R1 |
| 8 | R150 | R_0805 | R3, R4, R5, R6, R7, R8, R9, R10 |
Board 17 design files
The KiCad project lives in the WPISmartmouse/board_17 repository on GitHub; these links point at the commit this page was built from.
- Layoutsm_board.kicad_pcb
Board 17: common questions
What microcontroller does the Board 17 use?
The Board 17 is built around the Teensy3.6, from the NXP family.
How big is the Board 17?
The Board 17 measures 70.5 × 42.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Board 17?
45 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Board 17 design files?
From the WPISmartmouse/board_17 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Board 17 design in my own project?
The repository has no license, so all rights stay with WPISmartmouse. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Board 17 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532