STEAMGal Tetris
WRansohoff·STEAMGal_Tetris·board_design_v0/STEAMGal_STM32F051x/STEAMGal_STM32F051Kx.kicad_pcb
About the STEAMGal Tetris PCB
STEAMGal Tetris is an open source STM32 PCB design by WRansohoff, published on GitHub under the MIT license. It is a 2-layer board measuring 54 × 85.7 mm, with 63 components from 43 distinct parts.
Its main chip is the STM32F051K8, from the STM32 family. Other key parts include the AP2210. By type, the board carries 22 capacitors, 15 resistors, 9 switches, 8 connectors, 4 diodes and 2 ICs.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
Try writing some 'tetris' firmware for a development board with a very small display, a buzzer, and a few buttons. That should introduce a few core peripherals.
This is firmware for a 'tetris' game on a 'STEAMGal' board driven by an STM32 chip.
Incomplete. The firmware initializes the system clock to 48MHz driven by the HSI oscillator, then draws a simple menu to the OLED screen.
It sets up hardware interrupts for each of the 6 buttons - the 'A' button selects the test menu's start menu to start the game, and the 'Up' button returns to the menu from within the game. I'm hoping to add a 'pause' menu, though.

Main components on the STEAMGal Tetris
STEAMGal Tetris bill of materials (BOM)
63 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F051K8 | LQFP-32_7x7mm_Pitch0.8mm_HandSoldering | U1 |
| 1 | AP2210 | SOT-23_Handsoldering | U2 |
| 1 | ULED_NPN | SOT-23_Handsoldering | Q1 |
| 1 | PZ_NPN | SOT-23_Handsoldering | Q2 |
| 1 | HSE | XTAL_HF_2SMD_1 | Y1 |
| 1 | Power_In | Pin_Header_Angled_1x02 | P1 |
| 1 | Prog | Pin_Header_Angled_1x04 | P2 |
| 1 | SSD1306_ribbon | SSD1306_Raw | P3 |
| 1 | GPIO1 | Pin_Header_Straight_1x05 | P4 |
| 1 | GPIO2 | Pin_Header_Straight_1x06 | P5 |
| 1 | JSTIO2 | JST_PH_2.0-4 | P6 |
| 1 | I2C_Bus | Pin_Header_Straight_1x04 | P7 |
| 1 | JSTIO1 | JST_PH_2.0-4 | P8 |
| 1 | PIEZO | Piezo_Buzzer_Mini | S1 |
| 1 | On? | SPDT_Slide_SMD_RA | SW1 |
| 1 | Reset | Button_SMD_2L_3x6x2.5mm | SW2 |
| 1 | Left | Button_SMD_2L_3x6x2.5mm | SW3 |
| 1 | Up | Button_SMD_2L_3x6x2.5mm | SW4 |
| 1 | Down | Button_SMD_2L_3x6x2.5mm | SW5 |
| 1 | Right | Button_SMD_2L_3x6x2.5mm | SW6 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A | Button_SMD_2L_3x6x2.5mm | SW7 |
| 1 | B | Button_SMD_2L_3x6x2.5mm | SW8 |
| 1 | <0.5Vf | SOD-123 | D1 |
| 1 | On? | LED_0805 | D2 |
| 1 | ESD | SOD-123 | D3 |
| 1 | User_LED | LED_0805 | D4 |
| 1 | 10u | TantalC_SizeA_EIA-3216_HandSoldering | C1 |
| 3 | 4.7u | C_0805_HandSoldering | C2, C14, C15 |
| 2 | 20p | C_0603_HandSoldering | C3, C4 |
| 3 | 100n | C_0805_HandSoldering | C5, C8, C9 |
| 7 | 10n | C_0805_HandSoldering | C6, C17, C18, C19, C20, C21, C22 |
| 3 | 1u | C_0805_HandSoldering | C7, C12, C13 |
| 1 | Pump2 | C_0805_HandSoldering | C10 |
| 1 | Pump1 | C_0805_HandSoldering | C11 |
| 1 | 2.2u | C_0805_HandSoldering | C16 |
| 1 | RLED | R_0805_HandSoldering | R1 |
| 2 | 4K7 | R_0805_HandSoldering | R2, R3 |
| 1 | IREF | R_0805_HandSoldering | R4 |
| 2 | I2C_PU | R_0805_HandSoldering | R5, R6 |
| 1 | RB_UL | R_0805_HandSoldering | R7 |
| 1 | ULEDR | R_0805_HandSoldering | R8 |
| 1 | RB_Pz | R_0805_HandSoldering | R9 |
| 6 | DB | R_0805_HandSoldering | R10, R11, R12, R13, R14, R15 |
STEAMGal Tetris design files
The KiCad project lives in the WRansohoff/STEAMGal_Tetris repository on GitHub; these links point at the commit this page was built from.
STEAMGal Tetris: common questions
What microcontroller does the STEAMGal Tetris use?
The STEAMGal Tetris is built around the STM32F051K8, from the STM32 family.
How big is the STEAMGal Tetris PCB?
The STEAMGal Tetris measures 54 × 85.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STEAMGal Tetris?
63 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the STEAMGal Tetris design files?
From the WRansohoff/STEAMGal_Tetris repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STEAMGal Tetris design in my own project?
Yes, under the terms of its MIT license, which WRansohoff chose for the repository.
Can I test firmware for the STEAMGal Tetris without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k