Panel
About the Panel PCB
Panel is an open source RISC-V PCB design by wrickert, published on GitHub. It is a 2-layer board measuring 153.6 × 171.1 mm, with 8 components from 8 distinct parts.
Its main chip is the CH585M, from the RISC-V family. Other key parts include the W25Q16JVSS. By type, the board carries 3 connectors, 2 ICs, 1 battery holder, 1 switch and 1 capacitor.
Main components on the Panel
Panel bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH585M CH32V006 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | W25Q16JVSS | SSOP-8_3.95x5.21x3.27mm_P1.27mm | U4 |
| 1 | CONN_01X02 Speaker | Fuet-1230 | J1 |
| 1 | CONN_01X02 Debug | PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | CONN_01X02 Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical_SMD | J3 |
| 1 | 3XAAA Battery_Cell | BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | C2905041 SW_SPDT | SK-3296S_switch | SW1 |
| 1 | 24P 100n | C_0805_2012Metric | C3 |
Panel design files
The KiCad project lives in the wrickert/UntitledElectronics repository on GitHub; these links point at the commit this page was built from.
Panel: common questions
What microcontroller does the Panel use?
The Panel is built around the CH585M, from the RISC-V family.
How big is the Panel PCB?
The Panel measures 153.6 × 171.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Panel?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Panel design files?
From the wrickert/UntitledElectronics repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Panel design in my own project?
The repository has no license, so all rights stay with wrickert. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in UntitledElectronics
ESP32Neosword
217.1 × 77.1 mm70 parts2LNo license8
RISC-VCyberTastic
88.1 × 44.6 mm60 parts2LNo license8
RISC-VMilkTastic
189.9 × 85.6 mm35 parts2LNo license8
RISC-VCorncon Grain
124.8 × 81 mm17 parts2LNo license8
RISC-VRick
37.5 × 42 mm14 parts2LNo license8
X PCBnut
190 × 7 mm10 parts2LNo license8
RISC-VUSBCpwr
43 × 45 mm10 parts2LNo license8
Z PCBnut
7 × 145 mm10 parts2LNo license8
RISC-VLLTB
59.7 × 63.4 mm8 parts2LNo license8
RISC-VKorok
44.5 × 76.5 mm8 parts2LNo license8
DumpsterFire
39.2 × 44.3 mm7 parts2LNo license8
Similar boards
RISC-VWorkbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0129
RISC-VKeytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105
RISC-VCh32v003f4u6 with wsled
40.6 × 44.5 mm26 parts2LMIT105
RISC-VFroggyswadge
81.5 × 72.2 mm92 parts2LMIT105
RISC-VNorthPoleCircuit
Janky-Jingle-Crew
150 × 110 mm46 parts4LNo license62
RISC-VOsc sg90-v006
OpenServoCore
20.6 × 9.6 mm26 parts4LApache-2.034