Rick
About the Rick PCB
Rick is an open source RISC-V PCB design by wrickert, published on GitHub. It is a 2-layer board measuring 37.5 × 42 mm, with 14 components from 11 distinct parts.
Its main chip is the CH585M, from the RISC-V family. By type, the board carries 4 jumpers, 4 diodes, 2 connectors, 2 resistors, 1 IC and 1 capacitor.
Main components on the Rick
Rick bill of materials (BOM)
14 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH585M CH32V003FxPx | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | CONN_01X02 Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical_SMD | J1 |
| 1 | CONN_01X02 OledDisplay | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | JOpen | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | JClosed | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | Jumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP4 |
| 1 | SS14 LED_Small | 156120VS75000-ReverseCircle | D1 |
| 3 | LED_Small | 156120VS75000-ReverseCircle | D2, D3, D4 |
| 1 | 100P C_Small | C_0805_2012Metric | C1 |
| 2 | R_Pack04 | R_Array_Convex_4x0603 | RN1, RN2 |
Rick design files
The KiCad project lives in the wrickert/UntitledElectronics repository on GitHub; these links point at the commit this page was built from.
Rick: common questions
What microcontroller does the Rick use?
The Rick is built around the CH585M, from the RISC-V family.
How big is the Rick PCB?
The Rick measures 37.5 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rick?
14 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rick design files?
From the wrickert/UntitledElectronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rick design in my own project?
The repository has no license, so all rights stay with wrickert. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rick without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in UntitledElectronics
ESP32Neosword
217.1 × 77.1 mm70 parts2LNo license8
RISC-VCyberTastic
88.1 × 44.6 mm60 parts2LNo license8
RISC-VMilkTastic
189.9 × 85.6 mm35 parts2LNo license8
RISC-VCorncon Grain
124.8 × 81 mm17 parts2LNo license8
Z PCBnut
7 × 145 mm10 parts2LNo license8
X PCBnut
190 × 7 mm10 parts2LNo license8
RISC-VUSBCpwr
43 × 45 mm10 parts2LNo license8
RISC-VPanel
153.6 × 171.1 mm8 parts2LNo license8
RISC-VLLTB
59.7 × 63.4 mm8 parts2LNo license8
RISC-VKorok
44.5 × 76.5 mm8 parts2LNo license8
DumpsterFire
39.2 × 44.3 mm7 parts2LNo license8
Similar boards
RISC-VWorkbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0129
RISC-VKeytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105
RISC-VCh32v003f4u6 with wsled
40.6 × 44.5 mm26 parts2LMIT105
RISC-VFroggyswadge
81.5 × 72.2 mm92 parts2LMIT105
RISC-VNorthPoleCircuit
Janky-Jingle-Crew
150 × 110 mm46 parts4LNo license62
RISC-VOsc sg90-v006
OpenServoCore
20.6 × 9.6 mm26 parts4LApache-2.034