Mood

wrightedu·mood·updated_mood/updated_mood.kicad_pcb

Mood PCB layout, top view — open source AVR/Arduino board by wrightedu

About the Mood PCB

Mood is an open source AVR/Arduino PCB design by wrightedu, published on GitHub. It is a 2-layer board measuring 53.9 × 54.2 mm, with 11 components from 7 distinct parts.

Its main chip is the Arduino_UNO_R3, from the AVR/Arduino family. Other key parts include the L293. By type, the board carries 3 connectors, 3 resistors, 2 diodes, 1 IC, 1 module and 1 buzzer.

From the project

Rationale Safety Bill of materials (BOM) The Circuit KiCAD Design * Arduino Software

Rationale Safety Bill of materials (BOM) The Circuit KiCAD Design * Arduino Software

Ahem, I mean welcome to the PCB design portion of your summer camp!

This project was selected to introduce a variety of topics including:

Circuit schematics / basic electronics PCB design (Computer-Aided Design using KiCAD) Hardware / Software trojans Hardware / Software bugs

By the end of these two weeks you will have a basic understanding of how to layout and build a basic circuit and what vulnerabilities it may have (unintentional or otherwise).

Mood, from the project README
From the project README

Main components on the Mood

Mood bill of materials (BOM)

11 components, 7 distinct parts.

QtyPartRefs
1
L293
U1
1
Arduino_UNO_R3
A1
2
Conn_01x02
J3, J6
1
Conn_01x03
J5
1
Buzzer
BZ1
2
LED_BKGR
D1, D2
3
R
R2, R3, R4

Mood design files

The KiCad project lives in the wrightedu/mood repository on GitHub; these links point at the commit this page was built from.

Mood: common questions

What microcontroller does the Mood use?

The Mood is built around the Arduino_UNO_R3, from the AVR/Arduino family.

How big is the Mood PCB?

The Mood measures 53.9 × 54.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mood?

11 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mood design files?

From the wrightedu/mood repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Mood design in my own project?

The repository has no license, so all rights stay with wrightedu. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mood without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards