BM83 breadboard adapter panel
wrobel111·Audi-CDC-Emulator·Hardware/BM83_breadboard_adapter/BM83_breadboard_adapter_panel.kicad_pcb
About the BM83 breadboard adapter panel PCB
BM83 breadboard adapter panel is an open source PCB design by wrobel111, published on GitHub. It is a 2-layer board measuring 76.2 × 99.1 mm, with 59 components from 29 distinct parts.
Other key parts include the BM83 and PJ-3027F. By type, the board carries 22 capacitors, 14 resistors, 8 switches, 6 connectors, 2 ICs and 2 diodes.
It belongs with the audio, iot & wireless and dev boards & breakouts designs in this gallery.
From the project
Embedded Audi CD changer emulator with Bluetooth audio and hands-free phone functionality based on ATmega328P.
Embedded CD changer emulator for Audi factory head units with Bluetooth audio streaming and hands-free phone functionality.
The project emulates an original Audi CD changer, allowing modern Bluetooth connectivity while preserving the original vehicle infotainment system. The hardware and firmware were designed to integrate seamlessly with factory radios without permanent vehicle modifications.
Main components on the BM83 breadboard adapter panel
BM83 breadboard adapter panel bill of materials (BOM)
59 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BM83 | BM83 | U1 |
| 1 | PJ-3027F | PJ-327A | U2 |
| 3 | PJ-320B | 3.5mm_stereo_jack_PJ320B | J1, J2, J6 |
| 1 | USB_B_Micro | USB_Micro-B | J3 |
| 2 | Conn_01x25_Female | Pin_Header_Straight_1x25 | J4, J5 |
| 1 | test_mode | Pin_Header_Straight_1x02 | JP3 |
| 3 | CG0603MLC-05E | R_0603_HandSoldering | RV1, RV2, RV3 |
| 1 | VOL- | SW_SPST_FSMSM | SW1 |
| 1 | VOL+ | SW_SPST_FSMSM | SW2 |
| 1 | PREV | SW_SPST_FSMSM | SW3 |
| 1 | NEXT | SW_SPST_FSMSM | SW4 |
| 1 | PLAY | SW_SPST_FSMSM | SW6 |
| 1 | SELECT | SW_SPST_FSMSM | SW7 |
| 1 | MFB | SW_SPST_FSMSM | SW8 |
| 1 | RESET | SW_SPST_FSMSM | SW9 |
| 2 | LED | LED_1206_HandSoldering | D1, D2 |
| 1 | 30 | R_1206_HandSoldering | L1 |
| 8 | 1u/16V | C_1206_HandSoldering | C1, C2, C3, C4, C17, C18, C20, C21 |
| 2 | 470p | C_0805_HandSoldering | C5, C6 |
| 4 | 100n | C_0805_HandSoldering | C7, C9, C13, C14 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1u/16V | TantalC_SizeA_EIA-3216_HandSoldering | C8, C12 |
| 1 | 10uF/16V | C_1206_HandSoldering | C10 |
| 1 | 10u/16V | C_1206_HandSoldering | C11 |
| 2 | 220u/16V | C_Radial_D6.3_L11.2_P2.5 | C15, C22 |
| 2 | 220p | C_0805_HandSoldering | C16, C19 |
| 7 | 1k | R_0805_HandSoldering | R1, R2, R3, R5, R11, R12, R14 |
| 2 | 2k | R_0805_HandSoldering | R4, R13 |
| 3 | 10k | R_0805_HandSoldering | R6, R7, R10 |
| 2 | 20 | R_0805_HandSoldering | R8, R9 |
BM83 breadboard adapter panel design files
The KiCad project lives in the wrobel111/Audi-CDC-Emulator repository on GitHub; these links point at the commit this page was built from.
BM83 breadboard adapter panel: common questions
How big is the BM83 breadboard adapter panel PCB?
The BM83 breadboard adapter panel measures 76.2 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BM83 breadboard adapter panel?
59 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the BM83 breadboard adapter panel design files?
From the wrobel111/Audi-CDC-Emulator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the BM83 breadboard adapter panel design in my own project?
The repository has no license, so all rights stay with wrobel111. Use it as a reference, and ask the author before reusing the design.
More boards in Audi-CDC-Emulator
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k