Car bluetooth v1.1
wrobel111·Audi-CDC-Emulator·Hardware/car bluetooth v1.1 - KiCad/car bluetooth v1.1.kicad_pcb
About the Car bluetooth v1.1 PCB
Car bluetooth v1.1 is an open source PCB design by wrobel111, published on GitHub. It is a 16-layer board measuring 52 × 116 mm, with 80 components from 35 distinct parts.
Other key parts include the BK3266_BOARD, MEGA328P, HT6872, AMS1117-3.3 and DIGISPARK. By type, the board carries 24 capacitors, 17 resistors, 9 test points, 7 ICs, 5 crystals and 4 switches.
It belongs with the audio and iot & wireless designs in this gallery.
From the project
Embedded Audi CD changer emulator with Bluetooth audio and hands-free phone functionality based on ATmega328P.
Embedded CD changer emulator for Audi factory head units with Bluetooth audio streaming and hands-free phone functionality.
The project emulates an original Audi CD changer, allowing modern Bluetooth connectivity while preserving the original vehicle infotainment system. The hardware and firmware were designed to integrate seamlessly with factory radios without permanent vehicle modifications.
Main components on the Car bluetooth v1.1
Car bluetooth v1.1 bill of materials (BOM)
80 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BK3266_BOARD | 40PIN_BOARD | U1 |
| 1 | MEGA328P | TQFP32-08_105 | U2 |
| 3 | HT6872 | SO8 | U3, U4, U5 |
| 1 | AMS1117-3.3 | SOT223 | U6 |
| 1 | DIGISPARK | DIGISPARK | U$7 |
| 1 | — | HC49_S_204 | Q1 |
| 1 | BC847 | SOT23_398 | Q2 |
| 1 | — | 43045-0400 | X1 |
| 1 | — | 43045-1600 | X2 |
| 1 | — | 1X04_325 | X3 |
| 1 | STEREOJACK | STX3100_970892 | X4 |
| 1 | USB-A-H | USB-A-H | X5 |
| 1 | — | R1206 | F1 |
| 1 | — | PUSHBUTTON_SMD_SJ | RESET0 |
| 3 | — | SJ_252 | S1, S2, S3 |
| 9 | TPB1,27 | B1,27_385 | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +1 |
| 1 | AUDIO_R | EI14 | TR1 |
| 1 | AUDIO_L | EI14 | TR2 |
| 1 | AUDIO_MIC | EI14 | TR3 |
| 1 | — | dummyfp0 | UNK_HOLE_0 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | dummyfp1 | UNK_HOLE_1 |
| 1 | — | dummyfp2 | UNK_HOLE_2 |
| 1 | — | dummyfp3 | UNK_HOLE_3 |
| 1 | — | dummyfp4 | UNK_HOLE_4 |
| 1 | — | dummyfp5 | UNK_HOLE_5 |
| 1 | — | dummyfp6 | UNK_HOLE_6 |
| 1 | — | dummyfp7 | UNK_HOLE_7 |
| 9 | 100n | C0805_334 | C1, C4, C5, C6, C7, C8, C9, C21 +1 |
| 2 | 22p | C0805_334 | C2, C3 |
| 13 | 1u | C0805_334 | C10, C11, C12, C13, C14, C15, C16, C17 +5 |
| 6 | 10k | R0805_334 | R1, R8, R9, R10, R11, R12 |
| 6 | 12k | R0805_334 | R2, R3, R4, R5, R6, R7 |
| 2 | 20k | R0805_334 | R13, R14 |
| 2 | 1,2k | R0805_334 | R15, R16 |
| 1 | 0 | R0805_334 | R17 |
Car bluetooth v1.1 design files
The KiCad project lives in the wrobel111/Audi-CDC-Emulator repository on GitHub; these links point at the commit this page was built from.
Car bluetooth v1.1: common questions
How big is the Car bluetooth v1.1 PCB?
The Car bluetooth v1.1 measures 52 × 116 mm, has 16 copper layers and is 1.6 mm thick.
How many components are on the Car bluetooth v1.1?
80 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Car bluetooth v1.1 design files?
From the wrobel111/Audi-CDC-Emulator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Car bluetooth v1.1 design in my own project?
The repository has no license, so all rights stay with wrobel111. Use it as a reference, and ask the author before reusing the design.
More boards in Audi-CDC-Emulator
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956