Vagabond1
wsprtv·vagabond1·kicad/vagabond1.kicad_pcb
About the Vagabond1 PCB
Vagabond1 is an open source PCB design by wsprtv, published on GitHub. It is a 2-layer board measuring 15.2 × 22.2 mm, with 15 components from 9 distinct parts.
Other key parts include the ATGM336H, V-MONITOR and Si5351A-B-GT. By type, the board carries 8 capacitors, 3 ICs, 3 resistors and 1 crystal.
It belongs with the sensors, test & measurement and rf & radio designs in this gallery.
From the project
Vagabond1 WSPR Transmitter
Vagabond1 is a tiny WSPR transmitter that piggybacks on the popular ESP32 C3 Super Mini board. It contains only 11 components (including 7 passives). Vagabond1 is fully supported by Nomad firmware.
- Schematic - Interactive BOM - KiCad Files - JLCPCB Fabrication Files - Nomad Firmware - ESP32 C3 Super Mini Documentation - Power Measurements
Vagabond1 boards can be assembled at JLCPCB using these fabrication files. An alternative BOM is provided replacing MS5351m with Si5351a. While the two parts have nearly identical performance, Si5351a consumes less power.

Main components on the Vagabond1
Vagabond1 bill of materials (BOM)
15 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATGM336H | ATGM336H | U1 |
| 1 | V-MONITOR | SOT-23 | U2 |
| 1 | Si5351A-B-GT | MSOP-10_3x3mm_P0.5mm | U3 |
| 1 | TCXO | TCXO_4Pin_2.5x2.0mm | X1 |
| 4 | 47u | C_0805_2012Metric | C1, C3, C4, C5 |
| 2 | 10u | C_0402_1005Metric | C2, C7 |
| 2 | 100n | C_0402_1005Metric | C6, C8 |
| 2 | 10k | R_0402_1005Metric | R1, R3 |
| 1 | 47k | R_0402_1005Metric | R2 |
Vagabond1 design files
The KiCad project lives in the wsprtv/vagabond1 repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/vagabond1.kicad_pcb
- Schematickicad/vagabond1.kicad_sch
Vagabond1: common questions
How big is the Vagabond1 PCB?
The Vagabond1 measures 15.2 × 22.2 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Vagabond1?
15 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vagabond1 design files?
From the wsprtv/vagabond1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vagabond1 design in my own project?
The repository has no license, so all rights stay with wsprtv. Use it as a reference, and ask the author before reusing the design.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kSensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k