10 open source boards using the ATGM336H
Real designs built with the ATGM336H, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
StratoSoar-MK3.0
crnicholson
36.6 × 60.3 mm76 parts4LNo license42ESP32
Cutie-Wardriver
LyndLabs
39 × 63 mm13 parts2LMIT21ESP32
Esp32-loradv transceiver
alonsoo-rodriguez
40 × 95.3 mm30 parts2LNo license1Vagabond1
wsprtv
15.2 × 22.2 mm15 parts2LNo license1ESP32
Chronofit
inox85
51.7 × 98 mm96 parts4LNo license0ESP32
Meshtastic v0
luthfai
71 × 46 mm74 parts2LNo license0Elec-327-pico balloon project
justinsso
30.6 × 35 mm56 parts2LNo license0Microchip SAM
Topaz
dfedor2008
30.5 × 72.9 mm56 parts4LNo license0GpsBreakout
crnicholson
19.4 × 32.5 mm17 parts2LNo license42ESP32
Meshtastic v0-rounded
luthfai
71 × 46 mm71 parts2LNo license0
How designs wire the ATGM336H
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ATGM336H connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VBAT pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 10 µF).
- The VCC_RF pin is left unconnected on 3 of 5 designs.
- The SDA pin is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 10, 12 | Connected to: GND 83% | — |
| VBATpin 6 | Connected to: A connector 40% · 3.3V 20% |
|
| NCpin 7, 13, 15, 18 | Connected to: Not connected 95% | — |
| VCCpin 8 | Connected to: 3.3V 60% · a signal 40% |
|
| RF_INpin 11 | Connected to: A connector 60% |
|
| VCC_RFpin 14 | Connected to: Not connected 60% · VCC_RF 20% · a signal 20% | — |
| SDApin 16 | Connected to: Not connected 60% · a signal 40% |
|
| SCLpin 17 | Connected to: Not connected 60% · a signal 40% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GpsBreakout by crnicholson, Cutie-Wardriver by LyndLabs, Esp32-loradv transceiver by alonsoo-rodriguez and Vagabond1 by wsprtv.
The ATGM336H in open source designs
The gallery holds 10 open source boards using the ATGM336H from 8 GitHub repositories; a typical one measures about 37.8 × 53.2 mm and carries around 56 components.
70% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.
The most starred is StratoSoar-MK3.0 by crnicholson.
Parts used alongside the ATGM336H
Microcontrollers on boards using the ATGM336H
What boards using the ATGM336H are built for
ATGM336H: common questions
Where can I find a ATGM336H reference design?
Each of the 10 boards on this page is a real design using the ATGM336H. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ATGM336H VCC pin?
The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the ATGM336H.
How is the ATGM336H VBAT pin connected?
The VBAT pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the ATGM336H.
How is the ATGM336H VCC_RF pin connected?
The VCC_RF pin is left unconnected on 3 of 5 designs. Counted from the KiCad layouts of 8 open source designs using the ATGM336H.
What parts are used alongside the ATGM336H?
The BME280, ATSAMD21G18A-A and RA-01 appear in the most repositories here.
Which microcontrollers do boards using the ATGM336H use?
Most are built on ESP32 (5) and Microchip SAM (2).
How big is a typical board using the ATGM336H?
The median is 37.8 × 53.2 mm, and 70% are two-layer designs.
What is the most popular open source board using the ATGM336H?
By GitHub stars, StratoSoar-MK3.0 by crnicholson, with 42 stars.
Can I simulate one of these boards using the ATGM336H before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.