HardLabs

WeActStudioSTM32H750Guides

XDurango2·WeActStudioSTM32H750Guides·Schematics/STM32H750VBT6_ultra/STM32H750VBT6_ultra.kicad_pcb

WeActStudioSTM32H750Guides PCB layout, top view — open source STM32 board by XDurango2

About the WeActStudioSTM32H750Guides PCB

WeActStudioSTM32H750Guides is an open source STM32 PCB design by XDurango2, published on GitHub under the MIT license. It is a 2-layer board measuring 49 × 86.9 mm, with 117 components from 24 distinct parts.

Its main chip is the STM32H750VBT6, from the STM32 family. Other key parts include the MAX809TEUR_T, AP2112K-3.3, W25Q64JVSSIQ, XC6206P332MR-G and SI2301CDS-T1-GE3. By type, the board carries 42 resistors, 35 capacitors, 9 ICs, 4 connectors, 3 switches and 2 transistors.

From the project

Guides to Use the WeActStudioSTM32H750

This repository contains a collection of guides and documentation for using the WeActStudio MiniSTM32H7xx board, including:

- Flashing the OpenMV firmware - Using the board with Arduino IDE - Driving the WeActStudio ST7735 display under OpenMV - Example scripts and helper files

These guides are intended to simplify development for users working with the STM32H7-based WeActStudio boards.

Main components on the WeActStudioSTM32H750Guides

STM32H750VBT6MAX809TEUR_TAP2112K-3.3W25Q64JVSSIQXC6206P332MR-GSI2301CDS-T1-GE3

WeActStudioSTM32H750Guides bill of materials (BOM)

117 components, 24 distinct parts.

QtyPartRefs
1
STM32H750VBT6
IC1
1
MAX809TEUR_T
U1
1
AP2112K-3.3
U2
2
W25Q64JVSSIQ
U3, U7
3
XC6206P332MR-G
PMIC-LDO-XC6206P332MR-G_SOT23_
U4, U5, U6
1
SI2301CDS-T1-GE3
U8
1
MMBT3906
Q1
1
BC857
Q2
1
ABS05-32.768KHZ-7-T
Y1
1
ABM3-25.000MHZ-D2Y-T
Y2
1
SFV24R-3STBE1HLF
J1
1
USB_C_Receptacle_USB2.0_16P
J2
1
Micro_SD_Card_Det_Hirose_DM3AT
J3
1
5051100892
J5
11
SP0402B-ULC-01ETG
CR1, CR2, CR3, CR6, CR7, CR8, CR9, CR10 +3
2
LESD5Z5.0CT1G
CR4, CR5
3
MMZ1608Y102BTA00
FL1, FL2, FL3
3
SW_Push
SW1, SW2, SW3
1
BAT54C-7-F
D1
1
APT1608QBC_D
D2
Show 4 more
QtyPartRefs
1
SRP4020TA-2R2M
L1
1
MLZ2012M100W
L2
35
CL10C100JB8NNNC
C1, C2, C3, C4, C5, C6, C7, C8 +27
42
R
R1, R2, R3, R4, R5, R6, R7, R8 +34

WeActStudioSTM32H750Guides design files

The KiCad project lives in the XDurango2/WeActStudioSTM32H750Guides repository on GitHub; these links point at the commit this page was built from.

WeActStudioSTM32H750Guides: common questions

What microcontroller does the WeActStudioSTM32H750Guides use?

The WeActStudioSTM32H750Guides is built around the STM32H750VBT6, from the STM32 family.

How big is the WeActStudioSTM32H750Guides PCB?

The WeActStudioSTM32H750Guides measures 49 × 86.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the WeActStudioSTM32H750Guides?

117 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the WeActStudioSTM32H750Guides design files?

From the XDurango2/WeActStudioSTM32H750Guides repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the WeActStudioSTM32H750Guides design in my own project?

Yes, under the terms of its MIT license, which XDurango2 chose for the repository.

Can I test firmware for the WeActStudioSTM32H750Guides without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards