5 open source boards using the STM32H750VBT6

Real designs built with the STM32H750VBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the STM32H750VBT6

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32H750VBT6 connects to, and the resistors, capacitors and other passives placed on it.

  • The NRST pin has a capacitor to GND on 5 of 5 designs, most often 100 nF.
  • The VREF+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The VDDA pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The VCAP_1 pin has a capacitor to GND on 5 of 5 designs, most often 2.2 µF (then 100 nF).
VBATpin 6Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 60% · 100 nF (5), 10 µF (1)
PC14-OSC32_INpin 8Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 60% · 18 pF (1), 12 pF (1)
  • Crystal on 60% · 32.768 kHz (3)
PC15-OSC32_OUTpin 9Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 60% · 18 pF (1), 12 pF (1)
  • Crystal on 60% · 32.768 kHz (3)
VSS_1pin 10Connected to: GND 100%
VDD_1pin 11Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (5)
PH0-OSC_INpin 12Connected to: Signal 80% · not connected 20%
  • Crystal on 80% · 16 MHz (2), 32 MHz (1), 25 MHz (1)
  • Capacitor to GND on 80% · 12 pF (2), 18 pF (1)
PH1-OSC_OUTpin 13Connected to: Signal 80% · not connected 20%
  • Crystal on 60% · 16 MHz (1), 32 MHz (1), 25 MHz (1)
  • Capacitor to GND on 60% · 18 pF (1), 12 pF (1)
NRSTpin 14Connected to: A connector 80%
  • Capacitor to GND on 100% · 100 nF (4)
  • Pull-up to 3.3V on 60% · 10 kΩ (3)
PC0pin 15Connected to: Not connected 60% · a signal 40%
PC1pin 16Connected to: Not connected 60% · a signal 40%
PC2_Cpin 17Connected to: Not connected 60% · a signal 40%
VSSApin 19Connected to: GND 80% · not connected 20%
VREF+pin 20Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (7), 1 µF (2)
VDDApin 21Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (9), 1 µF (2)
VSS_2pin 26Connected to: GND 100%
VDD_2pin 27Connected to: 3.3V 80% · not connected 20%
  • Decoupling capacitor on 80% · 100 nF (7)
PB0pin 34Connected to: Not connected 60% · a signal 40%
PB1pin 35Connected to: Not connected 60% · a signal 40%
PE15pin 45Connected to: Not connected 60% · a signal 40%
VCAP_1pin 48Connected to: Signal 100%
  • Capacitor to GND on 100% · 2.2 µF (2), 100 nF (1), 10 µF (1)
VSS_3pin 49Connected to: GND 100%
VDD_3pin 50Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (5)
PA8pin 67Connected to: A connector 40% · not connected 40%
  • Series resistor on 40% · 220 Ω (1)
PA10pin 69Connected to: Not connected 60% · a signal 40%
VCAP_2pin 73Connected to: Signal 100%
  • Capacitor to GND on 100% · 2.2 µF (2), 100 nF (1), 10 µF (1)
VSS_4pin 74Connected to: GND 100%
VDD_4pin 75Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (5)
PA15pin 77Connected to: Not connected 60% · a signal 40%
PD0pin 81Connected to: Not connected 60% · a signal 40%
PD1pin 82Connected to: Not connected 60% · a signal 40%
PB4pin 90Connected to: A connector 40%
  • Series resistor on 40% · 10 kΩ (1), 680 Ω (1)
PB6pin 92Connected to: Signal 100%
  • Series resistor on 60% · 10 kΩ (1), 680 Ω (1)
PB7pin 93Connected to: A connector 60%
  • Series resistor on 40% · 10 kΩ (1), 680 Ω (1)
BOOT0pin 94Connected to: Signal 100%
  • Resistor to GND on 60% · 10 kΩ (2)
PB8pin 95Connected to: A connector 60% · not connected 20%
  • Pull-up to 3.3V on 40% · 2.2 kΩ (1)
PB9pin 96Connected to: A connector 60% · not connected 20%
  • Pull-up to 3.3V on 40% · 2.2 kΩ (1)
VSS_5pin 99Connected to: GND 100%
VDD_5pin 100Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (6), 4.7 µF (1), 10 µF (1)

62 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include H7value by martinribelotta, H7PI by Peize-Liu, WeActStudioSTM32H750Guides by XDurango2 and HadesNT by david-who.

The STM32H750VBT6 in open source designs

The gallery holds 5 open source boards using the STM32H750VBT6 from 5 GitHub repositories; a typical one measures about 65 × 70 mm and carries around 94 components.

60% use four copper layers or more, and 40% carry an open source license.

The most starred is H7value by martinribelotta.

Parts used alongside the STM32H750VBT6

Microcontrollers on boards using the STM32H750VBT6

What boards using the STM32H750VBT6 are built for

STM32H750VBT6: common questions

Where can I find a STM32H750VBT6 reference design?

Each of the 5 boards on this page is a real design using the STM32H750VBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STM32H750VBT6 NRST pin connected?

The NRST pin has a capacitor to GND on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the STM32H750VBT6.

What decoupling capacitors do designs use on the STM32H750VBT6 VREF+ pin?

The VREF+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32H750VBT6.

What decoupling capacitors do designs use on the STM32H750VBT6 VDDA pin?

The VDDA pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32H750VBT6.

Which microcontrollers do boards using the STM32H750VBT6 use?

Most are built on STM32 (5).

How big is a typical board using the STM32H750VBT6?

The median is 65 × 70 mm, and 40% are two-layer designs.

What is the most popular open source board using the STM32H750VBT6?

By GitHub stars, H7value by martinribelotta, with 12 stars.

Can I simulate one of these boards using the STM32H750VBT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part