62 open source boards using the XC6206P332MR-G

Real designs built with the XC6206P332MR-G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

62 boardsClear filters|Most starred

How designs wire the XC6206P332MR-G

Read from the KiCad layouts of 55 open source designs, one per repository: what each pin of the XC6206P332MR-G connects to, and the resistors, capacitors and other passives placed on it.

  • The VO pin has a decoupling capacitor on 52 of 55 designs, most often 1 µF (then 100 nF).
  • The VI pin has a decoupling capacitor on 52 of 55 designs, most often 1 µF (then 10 µF).
GNDpin 1Connected to: GND 96%
VOpin 2Connected to: 3.3V 87%
  • Decoupling capacitor on 95% · 1 µF (42), 100 nF (19), 10 µF (7)
VIpin 3Connected to: 5V 82% · a signal 16%
  • Decoupling capacitor on 95% · 1 µF (36), 10 µF (8), 2.2 µF (6)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HE60 by peppapighs, USB-C phone breathalyzer by claynicholson, StratoSoar-MK3.0 by crnicholson and Lemon pcb by rianadon.

The XC6206P332MR-G in open source designs

The gallery holds 62 open source boards using the XC6206P332MR-G from 55 GitHub repositories; a typical one measures about 65.3 × 58.7 mm and carries around 83 components.

56% are two-layer designs, the rest use four layers or more, and 65% carry an open source license.

The most starred is HE60 by peppapighs.

Microcontrollers on boards using the XC6206P332MR-G

XC6206P332MR-G: common questions

Where can I find a XC6206P332MR-G reference design?

Each of the 62 boards on this page is a real design using the XC6206P332MR-G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the XC6206P332MR-G VO pin?

The VO pin has a decoupling capacitor on 52 of 55 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 55 open source designs using the XC6206P332MR-G.

What decoupling capacitors do designs use on the XC6206P332MR-G VI pin?

The VI pin has a decoupling capacitor on 52 of 55 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 55 open source designs using the XC6206P332MR-G.

What parts are used alongside the XC6206P332MR-G?

The USBLC6-2SC6, STM32F072CBT6, AT32F405RCT7, RP2040 and TLV75733PDBV appear in the most repositories here.

Which microcontrollers do boards using the XC6206P332MR-G use?

Most are built on STM32 (22), RP2040/RP2350 (8), RISC-V (5) and Nordic nRF (2).

How big is a typical board using the XC6206P332MR-G?

The median is 65.3 × 58.7 mm, and 56% are two-layer designs.

What is the most popular open source board using the XC6206P332MR-G?

By GitHub stars, HE60 by peppapighs, with 114 stars.

Can I simulate one of these boards using the XC6206P332MR-G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part