34 open source boards using the W25Q64JVSSIQ

Real designs built with the W25Q64JVSSIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

34 boardsClear filters|Most starred

How designs wire the W25Q64JVSSIQ

Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the W25Q64JVSSIQ connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 20 of 24 designs, most often 100 nF (then 10 µF).
  • The CS pin has a pull-up to 3.3V on 14 of 24 designs, most often 10 kΩ.
  • The CS pin has a series resistor on 12 of 24 designs, most often 1 kΩ (then 0 Ω).
CSpin 1Connected to: The microcontroller 79%
  • Pull-up to 3.3V on 58% · 10 kΩ (11)
  • Series resistor on 50% · 1 kΩ (8), 0 Ω (2), 4.7 kΩ (1)
GNDpin 4Connected to: GND 96%
VCCpin 8Connected to: 3.3V 96%
  • Decoupling capacitor on 83% · 100 nF (30), 10 µF (1), 1 µF (1)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RP2040-Decoder by gab-k, GameTiger by codetiger, Buddy board-MINI-PCB by prusa3d and Music tinbox by onionharvester.

The W25Q64JVSSIQ in open source designs

The gallery holds 34 open source boards using the W25Q64JVSSIQ from 26 GitHub repositories; a typical one measures about 81.3 × 63.8 mm and carries around 86 components.

55% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.

The most starred is RP2040-Decoder by gab-k.

Microcontrollers on boards using the W25Q64JVSSIQ

W25Q64JVSSIQ: common questions

Where can I find a W25Q64JVSSIQ reference design?

Each of the 34 boards on this page is a real design using the W25Q64JVSSIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q64JVSSIQ VCC pin?

The VCC pin has a decoupling capacitor on 20 of 24 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 24 open source designs using the W25Q64JVSSIQ.

What pull-up resistor is used on the W25Q64JVSSIQ CS pin?

The CS pin has a pull-up to 3.3V on 14 of 24 designs, most often 10 kΩ. Counted from the KiCad layouts of 24 open source designs using the W25Q64JVSSIQ.

What parts are used alongside the W25Q64JVSSIQ?

The RP2040, AP2112K-3.3, USBLC6-2SC6, MCP73831-2-OT and A appear in the most repositories here.

Which microcontrollers do boards using the W25Q64JVSSIQ use?

Most are built on RP2040/RP2350 (17), STM32 (7), ESP32 (3) and FPGA (3).

How big is a typical board using the W25Q64JVSSIQ?

The median is 81.3 × 63.8 mm, and 55% are two-layer designs.

What is the most popular open source board using the W25Q64JVSSIQ?

By GitHub stars, RP2040-Decoder by gab-k, with 128 stars.

Can I simulate one of these boards using the W25Q64JVSSIQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part