ADSR EG
xdylanm·adsr-eg·hardware/adsr/adsr.kicad_pcb
About the ADSR EG PCB
ADSR EG is an open source PCB design by xdylanm, published on GitHub under the MIT license. It is a 4-layer board measuring 29 × 100 mm, with 86 components from 31 distinct parts.
Other key parts include the TLC555XD, HEF4093B and TL074. By type, the board carries 34 resistors, 17 capacitors, 11 diodes, 9 transistors, 4 ICs and 4 connectors.
Main components on the ADSR EG
ADSR EG bill of materials (BOM)
86 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TLC555XD TLC555xD | SOIC-8_3.9x4.9mm_P1.27mm | U1, U3 |
| 1 | HEF4093B | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 8 | BC847 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q9 |
| 1 | 2N7002K | SOT-23 | Q8 |
| 3 | MonoJack | Jack_3.5mm_QingPu_WQP-PJ301M-12_Vertical | J1, J2, J3 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J4 |
| 1 | B1M 1M | Potentiometer_Bourns_PTV09A-1_Single_Vertical_thin | RV1 |
| 1 | B10K B10k | Potentiometer_Bourns_PTV09A-1_Single_Vertical_thin | RV2 |
| 3 | A1M | Potentiometer_Bourns_PTV09A-1_Single_Vertical_thin | RV3, RV4, RV5 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | SW_DPDT_x2 | SW_Dailywell_DPDT_2MD1T1B1M1 | SW2 |
| 8 | 1N4148 | D_SOD-123 | D1, D2, D4, D5, D6, D7, D8, D9 |
| 1 | LED | LED_D3.0mm | D10 |
| 2 | B140-E3 | D_SMA | D11, D12 |
| 5 | 10N 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5, C6, C7 |
| 2 | 4U7 4u7 | CP_EIA-3216-18_Kemet-A_HandSolder | C2, C8 |
| 1 | 1n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 7 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C11, C12, C13, C14, C17 |
| 2 | 10U 10u | CP_Radial_D5.0mm_P2.50mm | C15, C16 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R5 |
| 6 | 47K 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7, R8, R9, R17, R20 |
| 2 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R10 |
| 7 | 22K 22k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R13, R15, R16, R18, R19, R21 |
| 4 | 10R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14, R33, R34 |
| 3 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R31, R32 |
| 1 | 270K 270k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 120K 120k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 2 | 4K7 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R27 |
| 3 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28, R29, R30 |
ADSR EG design files
The KiCad project lives in the xdylanm/adsr-eg repository on GitHub; these links point at the commit this page was built from.
ADSR EG: common questions
How big is the ADSR EG PCB?
The ADSR EG measures 29 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ADSR EG?
86 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ADSR EG design files?
From the xdylanm/adsr-eg repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ADSR EG design in my own project?
Yes, under the terms of its MIT license, which xdylanm chose for the repository.