9 open source boards using the TLC555XD
Real designs built with the TLC555XD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
1fNoiseAmplifierRev13
curtisseizert
140 × 100 mm375 parts6LMIT35FloppyBird
inmbolmie
88.9 × 59.7 mm25 parts2LGPL-3.02ADSR EG
xdylanm
29 × 100 mm86 parts4LMIT0555friend
harrisoncbrammell
97.9 × 113.9 mm38 parts2LNo license0ESP32
Plant Buddy
mkhairyx
80 × 80 mm37 parts2LNo license0Flyback 2
ArgonautGit
66 × 35 mm22 parts2LNo license0- schematic only · 48 parts
16b cpu
Cactus-ar
48 partsMIT0 DEitW
velvia-fifty
100 × 100 mm98 parts2LCC-BY-NC-4.01Feitw
mort13
19.1 × 100 mm40 parts2LGPL-3.012
How designs wire the TLC555XD
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TLC555XD connects to, and the resistors, capacitors and other passives placed on it.
- The Q pin has a series resistor on 6 of 7 designs, most often 9.53 kΩ (then 120 Ω).
- The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF).
- The THR pin has a capacitor to GND on 5 of 7 designs, most often 100 nF (then 47 µF).
- The CV pin has a capacitor to GND on 4 of 7 designs, most often 10 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 86% | — |
| TRpin 2 | Connected to: Signal 100% |
|
| Qpin 3 | Connected to: Signal 100% |
|
| CVpin 5 | Connected to: Signal 86% |
|
| THRpin 6 | Connected to: Signal 100% |
|
| DISpin 7 | Connected to: Signal 100% |
|
| VCCpin 8 | Connected to: VCC 86% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 1fNoiseAmplifierRev13 by curtisseizert, Feitw by mort13, FloppyBird by inmbolmie and Flyback 2 by ArgonautGit.
The TLC555XD in open source designs
The gallery holds 9 open source boards using the TLC555XD from 9 GitHub repositories; a typical one measures about 84.5 × 100 mm and carries around 40 components.
75% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is 1fNoiseAmplifierRev13 by curtisseizert.
Parts used alongside the TLC555XD
Microcontrollers on boards using the TLC555XD
What boards using the TLC555XD are built for
TLC555XD: common questions
Where can I find a TLC555XD reference design?
Each of the 9 boards on this page is a real design using the TLC555XD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TLC555XD Q pin?
The Q pin has a series resistor on 6 of 7 designs, most often 9.53 kΩ (then 120 Ω). Counted from the KiCad layouts of 7 open source designs using the TLC555XD.
What decoupling capacitors do designs use on the TLC555XD VCC pin?
The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the TLC555XD.
How is the TLC555XD THR pin connected?
The THR pin has a capacitor to GND on 5 of 7 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 7 open source designs using the TLC555XD.
Which microcontrollers do boards using the TLC555XD use?
Most are built on ESP32 (1).
How big is a typical board using the TLC555XD?
The median is 84.5 × 100 mm, and 75% are two-layer designs.
What is the most popular open source board using the TLC555XD?
By GitHub stars, 1fNoiseAmplifierRev13 by curtisseizert, with 35 stars.
Can I simulate one of these boards using the TLC555XD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.