Dual Gate Delay
xdylanm·gate-delay·hardware/dual-gate-delay/dual-gate-delay.kicad_pcb
About the Dual Gate Delay PCB
Dual Gate Delay is an open source AVR/Arduino PCB design by xdylanm, published on GitHub under the MIT license. It is a 4-layer board measuring 40 × 100 mm, with 55 components from 35 distinct parts.
Its main chip is the ATTINY13A-S, from the AVR/Arduino family. Other key parts include the TL074 and AMS1117-5.0. By type, the board carries 20 resistors, 10 diodes, 9 connectors, 8 capacitors, 4 ICs and 2 transistors.
It belongs with the audio designs in this gallery.
From the project
Gate delay module for Eurorack
The 'dual-gate-delay' project contains the hardware design for the v1.0 module. The 'gate-delay' project only contains schematic sketches (for reference related to the analog variant of the design). The 'ic-gate-delay' project is the v2.0 module (single gate delay with expanded IO).
Main components on the Dual Gate Delay
Dual Gate Delay bill of materials (BOM)
55 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY13A-S TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | TL074 ATtiny13A-S | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | AMS1117-5.0 ATtiny13A-S | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U4 |
| 2 | BC847 | SOT-23 | Q1, Q2 |
| 3 | WQP-PJ323M MonoJack | Jack_3.5mm_QingPu_WQP-PJ323M_Horizontal | J1, J2, J3 |
| 1 | WQP-PJ323M Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J4 |
| 3 | MonoJack | Jack_3.5mm_QingPu_WQP-PJ323M_Horizontal | J5, J6, J7 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J8 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Horizontal | J9 |
| 2 | B100K 100k | Potentiometer_Bourns_PTV09A-2_Single_Horizontal | RV1, RV2 |
| 4 | B140Q-13-F | D_SMA_Handsoldering | D1, D4, D5, D8 |
| 2 | B140Q-13-F | D_SMA_Handsoldering | D2, D7 |
| 2 | B140Q-13-F LED | LED_D3.0mm | D3, D6 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9, D10 |
| 4 | 100N 100n | C_0805_2012Metric | C1, C5, C6, C8 |
| 1 | 10N 100n | C_0805_2012Metric | C2 |
| 1 | 10U 10u | CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 10U 100n | C_0805_2012Metric | C4 |
| 1 | 100N 10u | CP_Radial_D5.0mm_P2.50mm | C7 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4K7 120k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10K 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 3 | 100K 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R9, R10 |
| 2 | 100K 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6 |
| 2 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R12 |
| 1 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 100K 120k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 2 | 4K7 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R17 |
| 1 | 10K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 10K 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 150K 10R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 10K 10R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 10R 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
Dual Gate Delay design files
The KiCad project lives in the xdylanm/gate-delay repository on GitHub; these links point at the commit this page was built from.
Dual Gate Delay: common questions
What microcontroller does the Dual Gate Delay use?
The Dual Gate Delay is built around the ATTINY13A-S, from the AVR/Arduino family.
How big is the Dual Gate Delay PCB?
The Dual Gate Delay measures 40 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Dual Gate Delay?
55 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dual Gate Delay design files?
From the xdylanm/gate-delay repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dual Gate Delay design in my own project?
Yes, under the terms of its MIT license, which xdylanm chose for the repository.
Can I test firmware for the Dual Gate Delay without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in gate-delay
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k