4 open source boards using the ATTINY13A-S

Real designs built with the ATTINY13A-S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ATTINY13A-S in open source designs

The gallery holds 4 open source boards using the ATTINY13A-S from 3 GitHub repositories; a typical one measures about 42 × 79.5 mm and carries around 53 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Slider by lucanastasio.

Microcontrollers on boards using the ATTINY13A-S

What boards using the ATTINY13A-S are built for

ATTINY13A-S: common questions

Where can I find a ATTINY13A-S reference design?

Each of the 4 boards on this page is a real design using the ATTINY13A-S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ATTINY13A-S use?

Most are built on AVR/Arduino (4).

How big is a typical board using the ATTINY13A-S?

The median is 42 × 79.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the ATTINY13A-S?

By GitHub stars, Slider by lucanastasio, with 1 stars.

Can I simulate one of these boards using the ATTINY13A-S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part