Hermes
xenomorphales·hermes
About the Hermes PCB
Hermes is an open source NXP PCB design by xenomorphales, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 120 × 80 mm, with 101 components from 28 distinct parts.
Its main chip is the Teensy3.2, from the NXP family. Other key parts include the OKI78SR5/1.5W36C and SN65HVD232. By type, the board carries 41 resistors, 29 capacitors, 20 connectors, 5 diodes, 3 ICs and 2 fuses.
From the project
Rolling base board
Hermes is a rolling base board that drives motors and gets feedback from encoders, IR distance sensors and limit switches.
Warning: before opening any file from this KiCad project, make sure to have a path set in KiCad (Preferences > Configure Paths) named XENOCAD and pointing to the KiCad subdirectory of our xenocad repository.
Main components on the Hermes
Hermes bill of materials (BOM)
101 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy3.2 | Teensy30_31_32_LC_sides_bottom | U101 |
| 1 | OKI78SR5/1.5W36C | OKI-78SR-Vertical | U201 |
| 1 | SN65HVD232 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U401 |
| 2 | Power_IO | Hirose_DF22-03P-7.92DS_03x7.92mm_Angled | P201, P202 |
| 2 | UART_IO | Molex_KK-6410-03_03x2.54mm_Straight | P301, P302 |
| 1 | I2C_IO | Molex_KK-6410-03_03x2.54mm_Straight | P303 |
| 2 | CAN_IO | Molex_KK-6410-03_03x2.54mm_Straight | P401, P402 |
| 2 | Encoder_IO | Molex_KK-6410-04_04x2.54mm_Straight | P601, P701 |
| 6 | GP2_IO | Molex_KK-6410-03_03x2.54mm_Straight | P801, P901, P1001, P1101, P1201, P1301 |
| 5 | DebouncedInput_IO | Molex_KK-6410-02_02x2.54mm_Straight | P1401, P1501, P1601, P1701, P1801 |
| 1 | Pololu_Dual_VNHxSP30_Motor_Driver_Carrier | Pololu_Dual_VNHxSP30_Motor_Driver_no_output | Carrier501 |
| 1 | FUSE 30A | Fuse_Eaton-ABC_20A+_Axial | F201 |
| 1 | FUSE 1A | Fuseholder_Littlefuse-646 | F202 |
| 3 | LED_Debug | LED_1206_HandSoldering | D101, D102, D103 |
| 1 | LED_15V | LED_1206_HandSoldering | D201 |
| 1 | LED_5V | LED_1206_HandSoldering | D202 |
| 9 | 10µF | C_1206_HandSoldering | C201, C501, C503, C801, C901, C1001, C1101, C1201 +1 |
| 14 | 100nF | C_1206_HandSoldering | C202, C203, C205, C401, C502, C504, C601, C701 +6 |
| 6 | 1µF | C_1206_HandSoldering | C204, C1401, C1501, C1601, C1701, C1801 |
| 3 | 120Ω | R_1206_HandSoldering | R101, R102, R103 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 6kΩ | R_1206_HandSoldering | R201 |
| 1 | 1.4kΩ | R_1206_HandSoldering | R202 |
| 14 | 10kΩ | R_1206_HandSoldering | R301, R302, R303, R304, R603, R604, R703, R704 +6 |
| 2 | 2kΩ | R_1206_HandSoldering | R305, R306 |
| 4 | 22Ω | R_1206_HandSoldering | R601, R602, R701, R702 |
| 6 | 20kΩ | R_1206_HandSoldering | R802, R902, R1002, R1102, R1202, R1302 |
| 5 | 100kΩ | R_1206_HandSoldering | R1401, R1501, R1601, R1701, R1801 |
| 5 | 18kΩ | R_1206_HandSoldering | R1402, R1502, R1602, R1702, R1802 |
Hermes design files
The KiCad project lives in the xenomorphales/hermes repository on GitHub; these links point at the commit this page was built from.
- LayoutHermes.kicad_pcb
Hermes: common questions
What microcontroller does the Hermes use?
The Hermes is built around the Teensy3.2, from the NXP family.
How big is the Hermes PCB?
The Hermes measures 120 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hermes?
101 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hermes design files?
From the xenomorphales/hermes repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Hermes design in my own project?
Yes, under the terms of its GPL-3.0 license, which xenomorphales chose for the repository.
Can I test firmware for the Hermes without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532