MicroPro-RP2040

XiaotianGuan·MicroPro-RP2040

MicroPro-RP2040 PCB layout, top view — open source RP2040/RP2350 board by XiaotianGuan

About the MicroPro-RP2040 PCB

MicroPro-RP2040 is an open source RP2040/RP2350 PCB design by XiaotianGuan, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 40 × 50 mm, with 51 components from 30 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3TRG1, W25Q128JVPIM, TMUX1204DQAR, ADS7042IRUGR and LM4040A30IDCKR. By type, the board carries 23 capacitors, 11 resistors, 6 ICs, 4 connectors, 3 diodes and 2 switches.

From the project

A RP2040 based board with an ads7042 ADC (muxed with GPIO) that's (mostly) compatible with Sparkfun ProMicro RP2040

This repository contains the KiCad project, gerber, BOM and other associated files for MicroPro RP2040, a custom RP2040 based dev board compatible with Sparkfun ProMicro RP2040.

The RP2040 is a great microcontroller, plenty powerful, well documented, and cheap. However, its on board ADC kinda sucked. I have another project which incorporates a Sparkfun ProMicro RP2040 board that uses the ADC, and I wish I can get more out of it.

Main components on the MicroPro-RP2040

RP2040AP2112K-3.3TRG1W25Q128JVPIMTMUX1204DQARADS7042IRUGRLM4040A30IDCKR

MicroPro-RP2040 bill of materials (BOM)

51 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
AP2112K-3.3TRG1
AP2112K-3.3
U2
1
W25Q128JVPIM
W25Q128JV
U3
1
TMUX1204DQAR
U5
1
ADS7042IRUGR
U6
1
LM4040A30IDCKR
LM4040DCK-3
U7
1
ABM8-272-T3
Y1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
SM04B-SRSS-TB(LF)(SN)(P)
Qwiic
J2
1
CONN_02X12_COUNTER_CLOCKWISE
Conn_02x12_Counter_Clockwise
J3
1
CONN_01X04
Conn_01x04
J4
1
SMD0603B050TF
6V 0.5A
F1
1
Boot
SW1
1
Reset
SW2
1
PMEG2005EJ-QX
PMEG2005EJ
D1
1
RED
D2
1
WS2812B-2020
D3
2
15P
15p
C1, C2
12
100N
100n
C3, C4, C5, C6, C7, C8, C9, C11 +4
8
2.2U
2.2u
C10, C13, C14, C15, C16, C17, C22, C24
Show 10 more
QtyPartRefs
1
1.5N
1.5n
C21
1
200
R1
2
1k
R2, R4
1
5.1K
10k
R3
1
10K
10k
R5
2
5.1K
5.1k
R6, R7
1
1.47K
1.47k
R8
1
24.9
R9
1
EXB-V4V270JV
RN1
1
CAT16-1002F4LF
RN2

MicroPro-RP2040 design files

The KiCad project lives in the XiaotianGuan/MicroPro-RP2040 repository on GitHub; these links point at the commit this page was built from.

MicroPro-RP2040: common questions

What microcontroller does the MicroPro-RP2040 use?

The MicroPro-RP2040 is built around the RP2040, from the RP2040/RP2350 family.

How big is the MicroPro-RP2040 PCB?

The MicroPro-RP2040 measures 40 × 50 mm, has 4 copper layers and is 0.8192 mm thick.

How many components are on the MicroPro-RP2040?

51 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MicroPro-RP2040 design files?

From the XiaotianGuan/MicroPro-RP2040 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MicroPro-RP2040 design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which XiaotianGuan chose for the repository.

Can I test firmware for the MicroPro-RP2040 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards