Rpi cm5-edge carrier

xmyoot·rpi-cm5-edge-carrier·hardware/CM5_Edge_Carrier.kicad_pcb

Rpi cm5-edge carrier PCB layout, top view — open source Raspberry Pi board by xmyoot

About the Rpi cm5-edge carrier PCB

Rpi cm5-edge carrier is an open source Raspberry Pi PCB design by xmyoot, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 100 × 85 mm, with 79 components from 44 distinct parts.

Its main chip is the Raspberry Pi CM5, from the Raspberry Pi family. Other key parts include the WCH CH224K, TI TPS565208DDCR, Diodes AP3441SHE-7B, Diodes AP22653W6-7 and TI TPD4EUSB30DQAR. By type, the board carries 27 capacitors, 25 resistors, 10 connectors, 7 ICs, 5 diodes and 2 switches.

It belongs with the audio and power & battery designs in this gallery.

From the project

Raspberry Pi CM5 edge-AI audio carrier: KiCad 10, 4-layer impedance-controlled, USB-C PD, NVMe, USB3, GbE, I2S mic link. DRC-clean, JLCPCB-ready, fully scripted.

A compact Raspberry Pi Compute Module 5 carrier board for an always-on edge-AI audio appliance. It is designed in KiCad 10, impedance-controlled on a 4-layer JLCPCB stack, and fully routed with 0 DRC errors, 0 unconnected items and 0 schematic-parity issues.

The board started from the requirements of a Jetson Orin NX carrier for emergency-vehicle audio. It keeps the same functional set (PD power path, NVMe, high-speed USB, GbE, I2S mic-array link, UART/I2C management, ESD on external ports), but runs on a Raspberry Pi CM5. Every peripheral maps to a native CM5 interface, so the carrier needs…

Rpi cm5-edge carrier, from the project README
From the project README

Main components on the Rpi cm5-edge carrier

WCH CH224KTI TPS565208DDCRDiodes AP3441SHE-7BDiodes AP22653W6-7TI TPD4EUSB30DQARST USBLC6-2SC6

Rpi cm5-edge carrier bill of materials (BOM)

79 components, 44 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
WCH CH224K
CH224K
U1
1
TI TPS565208DDCR
TPS565208
U2
1
Diodes AP3441SHE-7B
AP3441SHE-7B
U3
1
Diodes AP22653W6-7
AP22653W6
U4
2
TI TPD4EUSB30DQAR
TPD4EUSB30
U8, U9
1
ST USBLC6-2SC6
USBLC6-2SC6
U10
1
GCT USB4105-GF-A
USB-C PD IN
J1
1
MTCONN MTSSD03-67MSW337 (H=3.2 mm)
M.2 M-Key (NVMe 2230/2242)
J2
1
MTCONN UBAF30-D2011
USB 3.0 A x2 (stacked)
J3
1
Trxcom TRJG0926HENL
RJ45 MagJack 1000BASE-T
J4
1
GCT USB4105-GF-A
USB-C SERVICE
J5
1
2x6 2.54 mm shrouded box header
MIC ARRAY
J6
1
JST SM04B-SRSS-TB
QWIIC
J7
1
DEBUG UART
J8
1
JST SM04B-SRSS-TB
BARCODE
J9
1
JST SM04B-SRSS-TB
FAN
J10
1
Raspberry Pi CM5 + 2x Hirose DF40C-100DS-0.4V(51)
Raspberry Pi CM5
Module1
1
Omron B3U-1000P
POWER
SW1
1
Omron B3U-1000P
nRPIBOOT
SW2
1
Littelfuse SMAJ15A
SMAJ15A
D1
Show 24 more
QtyPartRefs
1
PD_OK
D2
1
PWR (red)
D3
1
ACT (green)
D4
1
SSD (green)
D5
1
Sunlord MWSA0603S-2R2MT
2.2uH
L1
1
Bourns SRP5030T-2R2M
2.2uH
L2
3
22UF
22uF
C1, C2, C4
1
1UF
1uF
C3
9
100NF
100nF
C5, C6, C11, C17, C22, C23, C30, C34 +1
8
22UF
22uF
C7, C8, C9, C10, C20, C21, C32, C33
5
10UF
10uF
C12, C14, C15, C16, C31
1
4.7NF
4.7nF
C13
4
1k
R1, R12, R13, R20
1
24K
24k
R2
3
4.7K
4.7k
R3, R33, R34
2
100K
100k
R4, R8
2
15K
15k
R5, R21
1
56K
56k
R6
3
10K
10k
R7, R9, R35
1
2.2K
2.2k
R10
1
0R
R11
2
470R
R22, R23
2
5.1K
5.1k
R24, R25
3
33R
R30, R31, R32

Rpi cm5-edge carrier design files

The KiCad project lives in the xmyoot/rpi-cm5-edge-carrier repository on GitHub; these links point at the commit this page was built from.

Rpi cm5-edge carrier: common questions

What microcontroller does the Rpi cm5-edge carrier use?

The Rpi cm5-edge carrier is built around the Raspberry Pi CM5, from the Raspberry Pi family.

How big is the Rpi cm5-edge carrier PCB?

The Rpi cm5-edge carrier measures 100 × 85 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Rpi cm5-edge carrier?

79 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rpi cm5-edge carrier design files?

From the xmyoot/rpi-cm5-edge-carrier repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rpi cm5-edge carrier design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which xmyoot chose for the repository.

Can I test firmware for the Rpi cm5-edge carrier without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards