Emailpad

xsollwa·emailpad·pcb/emailpad.kicad_pcb

Emailpad PCB layout, top view — open source RP2040/RP2350 board by xsollwa

About the Emailpad PCB

Emailpad is an open source RP2040/RP2350 PCB design by xsollwa, published on GitHub. It is a 2-layer board measuring 42 × 58 mm, with 9 components from 5 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 4 diodes and 1 IC.

From the project

Hackpad for writing emails!

Button 1 - Common email intro ("I hope this email finds you well.")

Button 2 - Common closing ("Best wishes,\nRuzanna")

Button 3 - Follow up reminder ("Please let me know if you have any questions")

1 Clockwise - Scroll up between email app fields (Tab)

2 Counterclockwise - Scroll down between email app fields (Shift+Tab)

- Custom pcb (using KiCAD) - Custom 3d model (using OnShape) - KMK firmware (using Python) - SK6812 MINI-E LEDs

Emailpad, from the project README
From the project README

Main components on the Emailpad

Emailpad bill of materials (BOM)

9 components, 5 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
3
SW_Push_45deg
SW1, SW2, SW3
1
RotaryEncoder
SW4
2
SK6812MINI
D1, D2
2
1N4148
D3, D4

Emailpad design files

The KiCad project lives in the xsollwa/emailpad repository on GitHub; these links point at the commit this page was built from.

Emailpad: common questions

What microcontroller does the Emailpad use?

The Emailpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Emailpad PCB?

The Emailpad measures 42 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Emailpad?

9 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Emailpad design files?

From the xsollwa/emailpad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Emailpad design in my own project?

The repository has no license, so all rights stay with xsollwa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Emailpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards