Xtremekb1
xtremejames1·xtremekb1
About the Xtremekb1 PCB
Xtremekb1 is an open source RP2040/RP2350 PCB design by xtremejames1, published on GitHub. It is a 2-layer board measuring 26.6 × 29.4 mm, with 77 components from 9 distinct parts.
Its main chip is the rp2040-zero, from the RP2040/RP2350 family. Other key parts include the PS4 Joystick. By type, the board carries 27 switches, 27 diodes, 18 jumpers, 3 connectors and 2 ICs.
Main components on the Xtremekb1
Xtremekb1 bill of materials (BOM)
77 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | rp2040-zero | rp2040-zero-tht | U1 |
| 1 | PS4 Joystick | PS4_joystick | U2 |
| 1 | ~ | PJ316 TRS | J1 |
| 1 | Conn_01x05_Pin | 5_Solder_Pad | J2 |
| 1 | Conn_01x05_Socket | 5_Solder_Pad | J3 |
| 9 | RJumper | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP3, JP5, JP7, JP9, JP11, JP13, JP15 +1 |
| 9 | LJumper | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP4, JP6, JP8, JP10, JP12, JP14, JP16 +1 |
| 27 | 1u MX | SW_Cherry_MX_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +19 |
| 27 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +19 |
Xtremekb1 design files
The KiCad project lives in the xtremejames1/xtremekb1 repository on GitHub; these links point at the commit this page was built from.
- Layoutxtremekeyboard1.kicad_pcb
- Schematicxtremekeyboard1.kicad_sch
Xtremekb1: common questions
What microcontroller does the Xtremekb1 use?
The Xtremekb1 is built around the rp2040-zero, from the RP2040/RP2350 family.
How big is the Xtremekb1 PCB?
The Xtremekb1 measures 26.6 × 29.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Xtremekb1?
77 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Xtremekb1 design files?
From the xtremejames1/xtremekb1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Xtremekb1 design in my own project?
The repository has no license, so all rights stay with xtremejames1. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Xtremekb1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k