EasyDroidVR
xxdamlaxx·DroidVR·EasyDroidVR_PCB/EasyDroidVR_PCB.kicad_pcb
About the EasyDroidVR PCB
EasyDroidVR is an open source STM32 PCB design by xxdamlaxx, published on GitHub under the MIT license. It is a 2-layer board measuring 67.3 × 120 mm, with 41 components from 23 distinct parts.
Its main chip is the STM32_Blue_Pill_DevBoard, from the STM32 family. Other key parts include the NRF24L01_Breakout and AMS1117-3.3. By type, the board carries 15 resistors, 11 connectors, 7 capacitors, 2 ICs, 2 diodes and 1 module.
From the project
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
DroidVR is available under a dual license model. Pick whichever fits your use case.
Use, modify, distribute, and sell DroidVR for free, as long as you provide clear and visible attribution in your project's documentation, about page, and repository.
If you prefer not to include attribution, you can purchase a commercial license:
Main components on the EasyDroidVR
EasyDroidVR bill of materials (BOM)
41 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | STM32_Blue_Pill_DevBoard | STM32_Blue_Pill_DevBoard | A1 |
| 1 | PINHD_1x2_Female | BatteryHolder_MYOUNG_BS-07-A1BJ001_CR2032 | J1 |
| 1 | PINHD_1x5_Female | PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | MPU6500 | PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | Battery Holder - | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J4 |
| 1 | PINHD_1x9_Male | PinHeader_1x09_P2.54mm_Vertical | J7 |
| 1 | PINHD_1x2_Female | BatteryHolder_MPD_BH-18650-PC2 | J8 |
| 5 | PINHD_1x1_Male | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J11, J12, J14, J15, J16 |
| 2 | PINHD_1x3_Male | PinHeader_1x03_P2.54mm_Vertical | pot/switch1, pot/switch2 |
| 1 | LED_5mm_RGB_Kcom_BKRG | PinHeader_1x04_P2.54mm_Vertical | LED1 |
| 1 | SS34 | D_SMC | D1 |
| 1 | LED_3mm | LED_D3.0mm | D2 |
| 3 | 100nF_Ceramic | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C4 |
| 1 | 470uF_16V | CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 100uF_10V | CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | 47uF_10V | CP_Radial_D4.0mm_P1.50mm | C7 |
| 1 | 10nF_Ceramic | C_Disc_D5.0mm_W2.5mm_P2.50mm | C8 |
| 3 | 330ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 33ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R13, R14, R15, R16, R17, R18, R19 +1 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R21 |
EasyDroidVR design files
The KiCad project lives in the xxdamlaxx/DroidVR repository on GitHub; these links point at the commit this page was built from.
EasyDroidVR: common questions
What microcontroller does the EasyDroidVR use?
The EasyDroidVR is built around the STM32_Blue_Pill_DevBoard, from the STM32 family.
How big is the EasyDroidVR PCB?
The EasyDroidVR measures 67.3 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EasyDroidVR?
41 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the EasyDroidVR design files?
From the xxdamlaxx/DroidVR repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the EasyDroidVR design in my own project?
Yes, under the terms of its MIT license, which xxdamlaxx chose for the repository.
Can I test firmware for the EasyDroidVR without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in DroidVR
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k