ProDroidVR
xxdamlaxx·DroidVR·DroidVR_PCB/ProDroidVR-PCB/ProDroidVR-PCB.kicad_pcb
About the ProDroidVR PCB
ProDroidVR is an open source STM32 PCB design by xxdamlaxx, published on GitHub under the MIT license. It is a 4-layer board measuring 30 × 100 mm, with 61 components from 30 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the NRF24L01_Breakout and AMS1117-3.3. By type, the board carries 22 resistors, 17 capacitors, 13 connectors, 3 ICs, 2 diodes and 1 crystal.
From the project
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
DroidVR is available under a dual license model. Pick whichever fits your use case.
Use, modify, distribute, and sell DroidVR for free, as long as you provide clear and visible attribution in your project's documentation, about page, and repository.
If you prefer not to include attribution, you can purchase a commercial license:
Main components on the ProDroidVR
ProDroidVR bill of materials (BOM)
61 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | Crystal_8MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | PINHD_1x2_Female | BatteryHolder_MYOUNG_BS-07-A1BJ001_CR2032 | J1 |
| 1 | PINHD_1x5_Female | PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | MPU6500 | PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | Battery Holder - | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J4 |
| 1 | Led Header | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | PINHD_1x5_Male | PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | PINHD_1x9_Male | PinHeader_1x09_P2.54mm_Vertical | J7 |
| 1 | PINHD_1x2_Female | BatteryHolder_MPD_BH-18650-PC2 | J8 |
| 5 | PINHD_1x1_Male | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J11, J12, J14, J15, J16 |
| 2 | PINHD_1x3_Male | PinHeader_1x03_P2.54mm_Vertical | pot/switch1, pot/switch2 |
| 1 | SS34 | D_SMC | D1 |
| 1 | LED_3mm | LED_D3.0mm | D2 |
| 1 | 120Ω @ 100MHz 0805 | R_0805_2012Metric | FB1 |
| 1 | 470uF_16V | CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 1uF_50V | CP_Radial_D4.0mm_P1.50mm | C5 |
| 1 | 100uF_10V | CP_Radial_D5.0mm_P2.00mm | C6 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47uF_10V | CP_Radial_D4.0mm_P1.50mm | C7 |
| 2 | C_0603 20pF | C_0603_1608Metric | C9, C10 |
| 5 | C_0603 100nF | C_0603_1608Metric | C11, C12, C13, C14, C15 |
| 5 | C_0805 100nF | C_0805_2012Metric | C16, C17, C18, C20, C21 |
| 1 | C_0805 10nF | C_0805_2012Metric | C19 |
| 3 | R_0805 10K | R_0805_2012Metric | R11, R12, R29 |
| 9 | R_0805 33ohm | R_0805_2012Metric | R17, R18, R19, R20, R21, R22, R23, R24 +1 |
| 3 | R_0805 330ohm | R_0805_2012Metric | R25, R26, R27 |
| 1 | R_0805 1K | R_0805_2012Metric | R28 |
| 6 | R_0805 4.7K | R_0805_2012Metric | R30, R31, R32, R33, R34, R35 |
ProDroidVR design files
The KiCad project lives in the xxdamlaxx/DroidVR repository on GitHub; these links point at the commit this page was built from.
ProDroidVR: common questions
What microcontroller does the ProDroidVR use?
The ProDroidVR is built around the STM32F103C8Tx, from the STM32 family.
How big is the ProDroidVR PCB?
The ProDroidVR measures 30 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ProDroidVR?
61 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the ProDroidVR design files?
From the xxdamlaxx/DroidVR repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ProDroidVR design in my own project?
Yes, under the terms of its MIT license, which xxdamlaxx chose for the repository.
Can I test firmware for the ProDroidVR without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in DroidVR
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k