DroidVR
xxdamlaxx·DroidVR·DroidVR_PCB/DroidVR_PCB.kicad_pcb
About the DroidVR PCB
DroidVR is an open source PCB design by xxdamlaxx, published on GitHub under the MIT license. It is a 2-layer board measuring 30 × 100 mm, with 44 components from 19 distinct parts.
Other key parts include the COM-09032, MT3608 and MCP1700T-3002E-MAY. By type, the board carries 15 resistors, 9 connectors, 9 capacitors, 6 transistors, 3 ICs and 2 diodes.
From the project
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
DroidVR is available under a dual license model. Pick whichever fits your use case.
Use, modify, distribute, and sell DroidVR for free, as long as you provide clear and visible attribution in your project's documentation, about page, and repository.
If you prefer not to include attribution, you can purchase a commercial license:
Main components on the DroidVR
DroidVR bill of materials (BOM)
44 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | COM-09032 | XDCR_COM-09032 | U1 |
| 1 | MT3608 | SOT-23-6 | U4 |
| 1 | MCP1700T-3002E-MAY | DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U5 |
| 6 | 2N7000 | TO-92_Inline_Wide_SGD | Q1, Q4, Q5, Q6, Q7, Q8 |
| 2 | PINHD_1x12_Male | PinHeader_1x12_P2.54mm_Vertical | J1, J2 |
| 1 | MPU6500 | PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | Battery Holder - | PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | Battery Holder + | PinSocket_1x01_P2.54mm_Vertical | J5 |
| 4 | PINHD_1x1_Male | PinHeader_1x01_P2.54mm_Vertical | J7, J8, J9, J10 |
| 1 | SS34 | D_SMC | D1 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 1 | C_Polarized 10uF/10V+ | CP_EIA-3216-18_Kemet-A | C1 |
| 1 | C_Polarized 10uF/16V+ | CP_EIA-3216-18_Kemet-A | C2 |
| 1 | C_Polarized 22uF/6.3V+ | CP_EIA-3216-18_Kemet-A | C3 |
| 1 | C_Polarized 22uF/10V+ | CP_EIA-3216-18_Kemet-A | C4 |
| 5 | C_1206 100nF | C_1206_3216Metric | C5, C6, C7, C8, C11 |
| 12 | R_1210 4.7KOhm | R_1210_3225Metric | R1, R2, R6, R7, R8, R9, R10, R11 +4 |
| 2 | R_1210 5.1KOhm | R_1210_3225Metric | R4, R5 |
| 1 | R_1210 330Ohm | R_1210_3225Metric | R16 |
DroidVR design files
The KiCad project lives in the xxdamlaxx/DroidVR repository on GitHub; these links point at the commit this page was built from.
DroidVR: common questions
How big is the DroidVR PCB?
The DroidVR measures 30 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DroidVR?
44 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the DroidVR design files?
From the xxdamlaxx/DroidVR repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DroidVR design in my own project?
Yes, under the terms of its MIT license, which xxdamlaxx chose for the repository.