Pulser V2 HC Board
xy-kasumi·Spark-pulser·pcb/pulser-hc/pulser-hc.kicad_pcb
About the Pulser V2 HC Board
Pulser V2 HC Board is an open source PCB design by xy-kasumi, published on GitHub. It is a 4-layer board measuring 100 × 50 mm, with 72 components from 50 distinct parts.
Other key parts include the ADUM1200AR, LM317_DPAK, LT3763 and TPSM365R6. By type, the board carries 30 capacitors, 22 resistors, 8 diodes, 4 ICs, 4 connectors and 2 transistors.
From the project
WIP "Pulser" EDM board
Explicitly designed for plunge EDM. But probably will work for wire EDM too.
Created for https://github.com/xy-kasumi/Spark project.
10A max pulse (see module spec for details) Designed for reliablity and modular testability (especially stress testing)
Assembly PCB (pcb/ JLCPCB friendly KiCad files (all manufacturable using "Economical PCBA" process)) ctrl-r2 hv-r4 hc-r3 firmware (ATtiny1616), for ctrl and hv enclosure: 3D print data in assy * needs a few other parts (12V fans & heatsinks)

Main components on the Pulser V2 HC Board
Pulser V2 HC Board bill of materials (BOM)
72 components, 50 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADUM1200AR ADuM1200AR | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LM317_DPAK | TO-252-2 | U2 |
| 1 | LT3763 | TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.74x4.75mm | U3 |
| 1 | TPSM365R6 | TI-RDN0011A-MFG | U4 |
| 1 | C3278729 N-ch, Vds>=60V, low Qgs | Infineon-TG-TDSON-8-NMOS | Q1 |
| 1 | C501503 N-ch, Vds>=60V, low Rds | Infineon-TG-TDSON-8-NMOS | Q2 |
| 2 | C8269 Screw_Terminal 2pin | Wurth_TerminalBlock_2pin_P5mm_691137710002 | J1, J2 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | Molex_200528-0080_1x08-1MP_P1.00mm_Horizontal | J6 |
| 1 | 10A | Fuse_Littelfuse-NANO2-451_453 | F1 |
| 1 | C968542 ~ | VISHAY-SMPC | D1 |
| 1 | C177047 ~ | D_SOD-123 | D2 |
| 1 | C177047 D | D_SOD-123 | D3 |
| 1 | C2927414 Ipeak>10A | TO-227A-2P | D4 |
| 1 | C150045 Vz=100V | D_SMB | D5 |
| 1 | C2927414 ~ | TO-227A-2P | D6 |
| 2 | LED | LED_0805_2012Metric | D7, D8 |
| 1 | 10U 10u | L_Bourns_SRP1245A | L1 |
| 2 | 1n | C_0402_1005Metric | C1, C4 |
| 2 | 220N 220n | C_0603_1608Metric | C2, C8 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22N 22n | C_0402_1005Metric | C3 |
| 3 | 10U 10u | C_0805_2012Metric | C5, C19, C20 |
| 1 | 470P 470p | C_0402_1005Metric | C6 |
| 1 | 4.7N 4.7n | C_0402_1005Metric | C7 |
| 1 | 1u | C_0805_2012Metric | C9 |
| 7 | 10U 10u | C_1206_3216Metric | C10, C11, C21, C22, C23, C24, C25 |
| 1 | 22N 22n | C_0805_2012Metric | C12 |
| 1 | 2.2U 2.2u | C_0603_1608Metric | C14 |
| 4 | 0.1U 0.1u | C_0402_1005Metric | C15, C16, C33, C35 |
| 2 | 10N 10n | C_0402_1005Metric | C17, C18 |
| 1 | 1u | C_0402_1005Metric | C26 |
| 1 | 10U 10u | C_0603_1608Metric | C27 |
| 2 | 1u | C_0603_1608Metric | C29, C30 |
| 2 | 1 | R_1206_3216Metric | R1, R6 |
| 1 | 5m | R_1206_3216Metric | R2 |
| 2 | 10 | R_0402_1005Metric | R3, R4 |
| 1 | 62K 62k | R_0402_1005Metric | R5 |
| 1 | 2.7K 2.7k | R_0402_1005Metric | R7 |
| 1 | 33K 33k | R_0402_1005Metric | R8 |
| 1 | 82K 82k | R_0402_1005Metric | R9 |
| 1 | 120K 120k | R_0402_1005Metric | R10 |
| 1 | 3.3 | R_2512_6332Metric | R11 |
| 2 | 10K 10k | R_0402_1005Metric | R12, R15 |
| 2 | 47K 47k | R_0402_1005Metric | R13, R25 |
| 1 | 110K 110k | R_0402_1005Metric | R14 |
| 2 | 1k | R_0402_1005Metric | R16, R19 |
| 1 | 240 | R_0402_1005Metric | R17 |
| 1 | 390 | R_0402_1005Metric | R18 |
| 1 | 1 | R_2512_6332Metric | R24 |
| 1 | 4.3K 4.3k | R_0402_1005Metric | R26 |
Pulser V2 HC Board design files
The KiCad project lives in the xy-kasumi/Spark-pulser repository on GitHub; these links point at the commit this page was built from.
Pulser V2 HC Board: common questions
How big is the Pulser V2 HC Board?
The Pulser V2 HC Board measures 100 × 50 mm, has 4 copper layers and is 1.564 mm thick.
How many components are on the Pulser V2 HC Board?
72 components, from 50 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pulser V2 HC Board design files?
From the xy-kasumi/Spark-pulser repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pulser V2 HC Board design in my own project?
The repository has no license, so all rights stay with xy-kasumi. Use it as a reference, and ask the author before reusing the design.