Pulser V2 Controller

xy-kasumi·Spark-pulser·pcb/pulser-ctrl/pulser-ctrl.kicad_pcb

Pulser V2 Controller PCB layout, top view — open source AVR/Arduino board by xy-kasumi

About the Pulser V2 Controller PCB

Pulser V2 Controller is an open source AVR/Arduino PCB design by xy-kasumi, published on GitHub. It is a 4-layer board measuring 40 × 45 mm, with 25 components from 15 distinct parts.

Its main chip is the ATTINY1616-M, from the AVR/Arduino family. Other key parts include the TPSM365R6. By type, the board carries 7 capacitors, 7 resistors, 5 connectors, 3 diodes and 2 ICs.

From the project

WIP "Pulser" EDM board

Explicitly designed for plunge EDM. But probably will work for wire EDM too.

Created for https://github.com/xy-kasumi/Spark project.

10A max pulse (see module spec for details) Designed for reliablity and modular testability (especially stress testing)

Assembly PCB (pcb/ JLCPCB friendly KiCad files (all manufacturable using "Economical PCBA" process)) ctrl-r2 hv-r4 hc-r3 firmware (ATtiny1616), for ctrl and hv enclosure: 3D print data in assy * needs a few other parts (12V fans & heatsinks)

Pulser V2 Controller, from the project README
From the project README

Main components on the Pulser V2 Controller

ATTINY1616-MTPSM365R6

Pulser V2 Controller bill of materials (BOM)

25 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY1616-M
ATtiny1616-M
U1
1
TPSM365R6
U2
1
I2C/XH
J1
2
CONN_01X08_PIN
Conn_01x08_Pin
J2, J4
1
C42391660
36V IN
J3
1
CONN_01X02_PIN
Conn_01x02_Pin
J5
1
MEE1S0505SC
PS1
3
LED
D1, D2, D3
2
1u
C1, C2
3
22U
22u
C3, C4, C5
2
1u
C6, C7
1
100K
100k
R1
4
10K
10k
R2, R3, R4, R6
1
40.2K
40.2k
R5
1
15.8K
15.8k
R7

Pulser V2 Controller design files

The KiCad project lives in the xy-kasumi/Spark-pulser repository on GitHub; these links point at the commit this page was built from.

Pulser V2 Controller: common questions

What microcontroller does the Pulser V2 Controller use?

The Pulser V2 Controller is built around the ATTINY1616-M, from the AVR/Arduino family.

How big is the Pulser V2 Controller PCB?

The Pulser V2 Controller measures 40 × 45 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Pulser V2 Controller?

25 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pulser V2 Controller design files?

From the xy-kasumi/Spark-pulser repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pulser V2 Controller design in my own project?

The repository has no license, so all rights stay with xy-kasumi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pulser V2 Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Spark-pulser

Similar boards