Isp

Xyrec·custom-whitefox-pcb·reference/lfkeyboards-public/isp-revc/isp.kicad_pcb

Isp PCB layout, top view — open source AVR/Arduino board by Xyrec

About the Isp PCB

Isp is an open source AVR/Arduino PCB design by Xyrec, published on GitHub. It is a 2-layer board measuring 30 × 40 mm, with 10 components from 8 distinct parts.

Its main chip is the ATTINY45-S, from the AVR/Arduino family. By type, the board carries 3 resistors, 2 connectors, 2 diodes, 1 IC, 1 fuse and 1 capacitor.

It belongs with the keyboards designs in this gallery.

From the project

Design a custom PCB that fits the existing Massdrop-era WhiteFox case and exact ISO plate layout. Use the original PCB and mechanical CAD to establish the outline, switch positions, required holes, and clearance constraints. The controller, electrical matrix, schematic, routing,

Design a custom PCB that fits the existing Massdrop-era WhiteFox case and exact ISO plate layout. Use the original PCB and mechanical CAD to establish the outline, switch positions, required holes, and clearance constraints. The controller, electrical matrix, schematic, routing, and firmware can all be designed from scratch; reproducing the WhiteFox electronics is not a goal.

Main components on the Isp

ATTINY45-S

Isp bill of materials (BOM)

10 components, 8 distinct parts.

QtyPartRefs
1
ATTINY45-S
IC1
1
USB_OTG
P1
1
CONN_02X03
P2
1
F_Small
F1
2
3.6v
D1, D2
1
0.1µF
C1
1
1.7kΩ
R1
2
68Ω
R2, R3

Isp design files

The KiCad project lives in the Xyrec/custom-whitefox-pcb repository on GitHub; these links point at the commit this page was built from.

Isp: common questions

What microcontroller does the Isp use?

The Isp is built around the ATTINY45-S, from the AVR/Arduino family.

How big is the Isp PCB?

The Isp measures 30 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Isp?

10 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Isp design files?

From the Xyrec/custom-whitefox-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Isp design in my own project?

The repository has no license, so all rights stay with Xyrec. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Isp without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in custom-whitefox-pcb

Similar boards