WhiteFox
Xyrec·custom-whitefox-pcb·reference/kiibohd-pcb/WhiteFox/WhiteFox.kicad_pcb
About the WhiteFox PCB
WhiteFox is an open source NXP PCB design by Xyrec, published on GitHub. It is a board measuring 304.8 × 95.3 mm, with 289 components from 25 distinct parts.
Its main chip is the MK20DX256VLH7, from the NXP family. Other key parts include the IS31FL3731C. By type, the board carries 87 switches, 87 LEDs, 71 diodes, 10 resistors, 9 capacitors and 3 connectors.
From the project
PCB and PCB Related Bits ========================
PCB and PCB Related Bits ========================
In general kicad is used for projects. A project will be explicit if another program is required to view.
WhiteFox, 2016-06-11 IC60 (Infinity 60% Keyboard, 2015-08-01) ICED Left and Right (Infinity Ergodox, 2015-08-07) DPH (Model F capsense controller using teensy2++)
Main components on the WhiteFox
WhiteFox bill of materials (BOM)
289 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MK20DX256VLH7 | LQFP64 | U1 |
| 1 | IS31FL3731C | SSOP-28 | U2 |
| 1 | TC1264 | SOT-223 | Q1 |
| 1 | CRYSTAL | NX3225SA | X1 |
| 1 | USB_CONN | USB2_MICROB_WURTH | J1 |
| 1 | FLASH_HDR | JLINK_NEEDLE | P1 |
| 1 | CONN_11 | HEADER_1x11 | P2 |
| 3 | >VALUE | FID | FID1, FID2, FID3 |
| 71 | SW | MX | S1, S2, S3, S4, S5, S6, S7, S8 +63 |
| 1 | TAC_SWITCH | TACT_5.2x5.2 | S72 |
| 15 | SW | MX_HIDDEN | S115, S145, S147, S159, S162, S163, S164, S165 +7 |
| 15 | STAB | STAB | STAB1, STAB2, STAB3, STAB4, STAB5, STAB6, STAB7, STAB8 +7 |
| 71 | LED | INSW_LEDS | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +63 |
| 1 | LED | LED-0603 | LED72 |
| 15 | LED | INSW_LEDS_HIDDEN | LED115, LED145, LED147, LED159, LED162, LED163, LED164, LED165 +7 |
| 71 | DIODE | SOT123-DIODE | D1, D2, D3, D4, D5, D6, D7, D8 +63 |
| 3 | 1uF | SMD-1005 | C1, C2, C6 |
| 5 | 0.1uF | SMD-1005 | C3, C4, C5, C7, C9 |
| 1 | 0.22uF | SMD-1005 | C8 |
| 2 | 33 | SMD-1005 | R1, R2 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100 | SMD-1005 | R3, R4 |
| 3 | 4.7k | SMD-1005 | R5, R6, R7 |
| 1 | 1k | SMD-1005 | R8 |
| 1 | 100k | SMD-1005 | R9 |
| 1 | 20k | SMD-1005 | R10 |
WhiteFox design files
The KiCad project lives in the Xyrec/custom-whitefox-pcb repository on GitHub; these links point at the commit this page was built from.
WhiteFox: common questions
What microcontroller does the WhiteFox use?
The WhiteFox is built around the MK20DX256VLH7, from the NXP family.
How big is the WhiteFox PCB?
The WhiteFox measures 304.8 × 95.3 mm and is 1.6002 mm thick.
How many components are on the WhiteFox?
289 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the WhiteFox design files?
From the Xyrec/custom-whitefox-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the WhiteFox design in my own project?
The repository has no license, so all rights stay with Xyrec. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the WhiteFox without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in custom-whitefox-pcb
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532