SMK65
Xyrec·custom-whitefox-pcb·reference/mechkeys/smk65/smk65.kicad_pcb
About the SMK65 PCB
SMK65 is an open source AVR/Arduino PCB design by Xyrec, published on GitHub. It is a board measuring 304.8 × 95.3 mm, with 149 components from 21 distinct parts.
Its main chip is the ATmega32U4-AU, from the AVR/Arduino family. By type, the board carries 89 switches, 18 diodes, 9 capacitors, 5 resistors, 4 connectors and 1 IC.
From the project
A few mechanical keyboard related kicad projects.
A few mechanical keyboard related kicad projects.
103-key: A layout from w00dyallen in this post: mydreamlayout103key99
layout.py: python script that will layout out a pcb and schematic from the output of http://www.keyboard-layout-editor.com/
dylibfix.sh: shell script that will fix the lib security errors in osx.
Apologies- I had to wipe the original and replace it. The new repo does not have most of my kicad projects. If you want a copy send me a message, but I can't keep them in the open any more.
Main components on the SMK65
SMK65 bill of materials (BOM)
149 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-AU | TQFP-44_10x10mm_Pitch0.8mm | U1 |
| 1 | CRYSTAL_SMD | Crystal_SMD_5032_4Pads | Y1 |
| 1 | USB_OTG | USB2_MICROB_WURTH | P1 |
| 1 | CONN_01X05 | JST_SH_SM05B-SRSS-TB_05x1.00mm_Angled | P2 |
| 1 | CONN_02X03 | Pin_Header_Straight_2x03 | P3 |
| 1 | CONN_01X03 | JST_SH_SM03B-SRSS-TB_03x1.00mm_Angled | P4 |
| 1 | FP_Small | C_1206 | F1 |
| 3 | MOUNT_HOLE | PKRH | MH1, MH2, MH3 |
| 1 | MOUNT_HOLE | PKRHC | MH4 |
| 2 | MOUNT_HOLE | PKRHSL | MH5, MH6 |
| 88 | MX_LED | SMK-Alps | S1, S2, S3, S4, S5, S6, S7, S8 +80 |
| 1 | SW_PUSH | SW_SPST_EVQP0 | S1_1 |
| 15 | STAB | STAB | STAB1, STAB2, STAB3, STAB4, STAB5, STAB6, STAB7, STAB8 +7 |
| 18 | 1SS309 | SC-74A | D1, D2, D3, D4, D5, D6, D7, D8 +10 |
| 2 | 18pF | C_0805 | C1, C2 |
| 5 | 0.1µF | C_0805 | C3, C6, C7, C8, C9 |
| 1 | 1µF | C_0805 | C4 |
| 1 | 4.7µF | C_1206 | C5 |
| 1 | 10k | R_0805 | R1 |
| 2 | 4.7k | R_0805 | R2, R3 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22 | R_0805 | R4, R5 |
SMK65 design files
The KiCad project lives in the Xyrec/custom-whitefox-pcb repository on GitHub; these links point at the commit this page was built from.
SMK65: common questions
What microcontroller does the SMK65 use?
The SMK65 is built around the ATmega32U4-AU, from the AVR/Arduino family.
How big is the SMK65 PCB?
The SMK65 measures 304.8 × 95.3 mm and is 1.6002 mm thick.
How many components are on the SMK65?
149 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the SMK65 design files?
From the Xyrec/custom-whitefox-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SMK65 design in my own project?
The repository has no license, so all rights stay with Xyrec. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SMK65 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in custom-whitefox-pcb
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k