Line Follower
YaayY360·PAMI-ENSEA--Coupe-de-france-2026·Kicad/Line_Follower/Line_Follower.kicad_pcb
About the Line Follower PCB
Line Follower is an open source PCB design by YaayY360, published on GitHub. It is a 2-layer board measuring 78 × 13.2 mm, with 36 components from 8 distinct parts.
Other key parts include the MCP3208. By type, the board carries 17 resistors, 9 ICs, 8 capacitors, 1 connector and 1 diode.
It belongs with the robotics & motion designs in this gallery.
From the project
- Contexte du projet - Cahier des charges - Architecture Hardware - Architecture Software - Conception du PCB - Schéma électronique - Routage & layout - Contraintes de fabrication - Composants & BOM - Alimentation - Communication & interfaces - Mécanique - Résultats - Difficultés
- Contexte du projet - Cahier des charges - Architecture Hardware - Architecture Software - Conception du PCB - Schéma électronique - Routage & layout - Contraintes de fabrication - Composants & BOM - Alimentation - Communication & interfaces - Mécanique - Résultats - Difficultés rencontrées - Mise en route - Équipe
Ce dépôt documente la carte électronique principale de notre robot PAMI, responsable de :
Main components on the Line Follower
Line Follower bill of materials (BOM)
36 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP3208 | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 8 | ~ | WE 1642730961200 | U2, U3, U4, U5, U6, U7, U8, U9 |
| 1 | Conn_01x06 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 8 | 100n | C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9, C10 |
| 1 | 10k | R_0603_1608Metric | R1 |
| 8 | 47 | R_0603_1608Metric | R2, R4, R6, R8, R10, R12, R14, R16 |
| 8 | 7k5 | R_0603_1608Metric | R3, R5, R7, R9, R11, R13, R15, R17 |
Line Follower design files
The KiCad project lives in the YaayY360/PAMI-ENSEA--Coupe-de-france-2026 repository on GitHub; these links point at the commit this page was built from.
Line Follower: common questions
How big is the Line Follower PCB?
The Line Follower measures 78 × 13.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Line Follower?
36 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Line Follower design files?
From the YaayY360/PAMI-ENSEA--Coupe-de-france-2026 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Line Follower design in my own project?
The repository has no license, so all rights stay with YaayY360. Use it as a reference, and ask the author before reusing the design.
More boards in PAMI-ENSEA--Coupe-de-france-2026
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979