PAMI TEAM SCRAT FINAL V2.1
YaayY360·PAMI-ENSEA--Coupe-de-france-2026·Kicad/PAMI_TEAM_SCRAT_FINAL_V2.1/PAMI_TEAM_SCRAT_FINAL_V2.1.kicad_pcb
About the PAMI TEAM SCRAT FINAL V2.1 PCB
PAMI TEAM SCRAT FINAL V2.1 is an open source STM32 PCB design by YaayY360, published on GitHub. It is a 4-layer board measuring 60 × 90 mm, with 68 components from 31 distinct parts.
Its main chip is the STM32H573RITx, from the STM32 family. Other key parts include the STLINK-V3MODS, 173010578, AZ1117CH2-3.3 and TB6612FNG. By type, the board carries 26 capacitors, 14 resistors, 12 diodes, 6 connectors, 5 ICs and 4 switches.
It belongs with the robotics & motion designs in this gallery, and the repository also holds 2 earlier revisions of it.
From the project
- Contexte du projet - Cahier des charges - Architecture Hardware - Architecture Software - Conception du PCB - Schéma électronique - Routage & layout - Contraintes de fabrication - Composants & BOM - Alimentation - Communication & interfaces - Mécanique - Résultats - Difficultés
- Contexte du projet - Cahier des charges - Architecture Hardware - Architecture Software - Conception du PCB - Schéma électronique - Routage & layout - Contraintes de fabrication - Composants & BOM - Alimentation - Communication & interfaces - Mécanique - Résultats - Difficultés rencontrées - Mise en route - Équipe
Ce dépôt documente la carte électronique principale de notre robot PAMI, responsable de :
Main components on the PAMI TEAM SCRAT FINAL V2.1
PAMI TEAM SCRAT FINAL V2.1 bill of materials (BOM)
68 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H573RITx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | STLINK-V3MODS | MODULE_STLINK-V3MODS | U2 |
| 1 | 173010578 | Converter_DCDC_RECOM_R-78E-0.5_THT | U3 |
| 1 | AZ1117CH2-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U5 |
| 1 | Crystal | Crystal_SMD_7050-4Pin_7.0x5.0mm | Y1 |
| 1 | ALIM | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | TOF | PinSocket_1x06_P2.54mm_Horizontal | J2 |
| 1 | IR | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J3 |
| 1 | M1 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J4 |
| 1 | M2 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J5 |
| 1 | XL320 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | BTN1 | SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | BTN2 | SW_SPST_PTS645Sx43SMTR92 | SW2 |
| 1 | BTN3 | SW_SPST_PTS645Sx43SMTR92 | SW3 |
| 1 | RESET | SW_SPST_PTS645Sx43SMTR92 | SW4 |
| 6 | 150060RS55040 LED | LED_0603_1608Metric | D1, D2, D3, D10, D11, D12 |
| 6 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4, D5, D6, D7, D8, D9 |
| 3 | 10n | C_0603_1608Metric | C1, C2, C3 |
| 9 | 100n | C_0603_1608Metric | C4, C5, C6, C7, C8, C9, C10, C15 +1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10u | C_0603_1608Metric | C11, C16, C18 |
| 1 | 22u | CP_Elec_5x5.4 | C12 |
| 2 | 20p | C_0603_1608Metric | C13, C14 |
| 2 | 2u2 | C_0603_1608Metric | C19, C20 |
| 5 | 1u | C_0603_1608Metric | C21, C22, C23, C24, C25 |
| 1 | 4u7 | C_0603_1608Metric | C26 |
| 7 | 10k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7 |
| 4 | 1k6 | R_0603_1608Metric | R8, R12, R13, R14 |
| 1 | 510 | R_0603_1608Metric | R9 |
| 1 | 3k3 | R_0603_1608Metric | R10 |
| 1 | 5k8 | R_0603_1608Metric | R11 |
PAMI TEAM SCRAT FINAL V2.1 design files
The KiCad project lives in the YaayY360/PAMI-ENSEA--Coupe-de-france-2026 repository on GitHub; these links point at the commit this page was built from.
PAMI TEAM SCRAT FINAL V2.1: common questions
What microcontroller does the PAMI TEAM SCRAT FINAL V2.1 use?
The PAMI TEAM SCRAT FINAL V2.1 is built around the STM32H573RITx, from the STM32 family.
How big is the PAMI TEAM SCRAT FINAL V2.1 PCB?
The PAMI TEAM SCRAT FINAL V2.1 measures 60 × 90 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PAMI TEAM SCRAT FINAL V2.1?
68 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the PAMI TEAM SCRAT FINAL V2.1 design files?
From the YaayY360/PAMI-ENSEA--Coupe-de-france-2026 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PAMI TEAM SCRAT FINAL V2.1 design in my own project?
The repository has no license, so all rights stay with YaayY360. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PAMI TEAM SCRAT FINAL V2.1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in PAMI-ENSEA--Coupe-de-france-2026
Earlier revisions in the repo: PAMI_TEAM_SCRAT_FINAL_V2, PAMI_TEAM_SCRAT_FINAL
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k