HardLabs

SHT30 breakout

Yadnik1·Low-Cost-Telematics-Device·SHT30_breakout PCB/SHT30_breakout.kicad_pcb

SHT30 breakout layout, top view — open source board by Yadnik1

About the SHT30 breakout

SHT30 breakout is an open source PCB design by Yadnik1, published on GitHub. It is a 2-layer board measuring 26.4 × 17.5 mm, with 6 components from 4 distinct parts.

Other key parts include the SHT30A-DIS-B2.5KS. By type, the board carries 2 connectors, 2 resistors, 1 IC and 1 capacitor.

It belongs with the sensors, dev boards & breakouts and displays & leds designs in this gallery.

From the project

Developed a cost-effective telematics device for automobiles, capable of enabling user-based insurance models to save up to 30% on premiums. Features include a two-layer PCB design in KiCad, efficient firmware in C with CMake, and advanced noise reduction in IMU sensors using Python.

1) The project involved the use of AECQ100 grade IMU and Temperature and Humidity sensors (SHT30A) sensors for which custom breakout boards had to be created in KiCAD and hold soldered: #### Breakout Board PCB of AEC-Q100 compliant SHT-30A Temperature and Humidity Sensor #### Breakout Board PCB of AEC-Q100 compliant 6-DOF IMU ASM330LHHXTR #### Fabricated Breakout Boards with IC

SHT30 breakout, from the project README
From the project README

Main components on the SHT30 breakout

SHT30A-DIS-B2.5KS

SHT30 breakout bill of materials (BOM)

6 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SHT30A-DIS-B2.5KS
IC1
2
CONN_01X04
Conn_01x04
J1, J2
1
100N
100n
C1
2
100K
100k
R1, R2

SHT30 breakout design files

The KiCad project lives in the Yadnik1/Low-Cost-Telematics-Device repository on GitHub; these links point at the commit this page was built from.

SHT30 breakout: common questions

How big is the SHT30 breakout?

The SHT30 breakout measures 26.4 × 17.5 mm, has 2 copper layers and is 1.59 mm thick.

How many components are on the SHT30 breakout?

6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SHT30 breakout design files?

From the Yadnik1/Low-Cost-Telematics-Device repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SHT30 breakout design in my own project?

The repository has no license, so all rights stay with Yadnik1. Use it as a reference, and ask the author before reusing the design.

More boards in Low-Cost-Telematics-Device

Similar boards