ATmega324PB
yanntalhouarne·PCBs·ATmega324PB-breakout-board/ATmega324PB/ATmega324PB.kicad_pcb
About the ATmega324PB PCB
ATmega324PB is an open source AVR/Arduino PCB design by yanntalhouarne, published on GitHub. It is a 2-layer board measuring 43.3 × 40.4 mm, with 46 components from 31 distinct parts.
Its main chip is the ATMEGA324PB-ABT, from the AVR/Arduino family. Other key parts include the FT232RL and TLV713285PDBV. By type, the board carries 12 capacitors, 11 resistors, 8 connectors, 5 diodes, 3 ICs and 3 switches.
From the project
My PCB files (KiCAD and Gerber) for a few of my boards.
Breakout board for the ATmega324PB (automative rated)
Main components on the ATmega324PB
ATmega324PB bill of materials (BOM)
46 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT232RL | SSOP28-LD | IC1 |
| 1 | ATMEGA324PB-ABT | QFP80P1200X1200X120-44N | U2 |
| 1 | TLV713285PDBV | SOT-23-5 | U3 |
| 1 | TSX-3225 16.0000MF09Z-AC3 | TSX_3225_16MF09ZAC3 | Y1 |
| 1 | Micro USB | USB_10118192-0001LF | J1 |
| 1 | 5V_IN | Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | VOUT | Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | JTAG | Pin_Header_Straight_2x05_Pitch1.27mm | J4 |
| 1 | digital | Pin_Header_Straight_2x04_Pitch2.54mm | J5 |
| 1 | SPI0/ICSP | Pin_Header_Straight_2x03_Pitch2.54mm | J6 |
| 1 | ADC | Pin_Header_Straight_1x08_Pitch2.54mm | J7 |
| 1 | COMM | Pin_Header_Straight_2x06_Pitch2.54mm | J8 |
| 2 | KMR231NG LFS | SW_SPST_KMR2 | S1, S3 |
| 1 | DPDT (P/N: 452403012014) | JS202011SCQN | S2 |
| 2 | TEST | Pin_Header_Straight_1x01_Pitch1.00mm | TP1, TP2 |
| 1 | RED | LED_0603 | D1 |
| 1 | BLUE | LED_0603 | D2 |
| 3 | LED | LED_0603 | D3, D4, D5 |
| 1 | BLM18PG471SN1 | L_0603 | L1 |
| 2 | 1.8p | C_0402 | C1, C2 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7n | C_0402 | C3, C8 |
| 2 | 1u | C_0402 | C4, C13 |
| 1 | 10U | C_0603 | C5 |
| 3 | .1u | C_0402 | C6, C10, C12 |
| 1 | 22u | C_0603 | C7 |
| 1 | 4.7u | C_0603 | C11 |
| 2 | 100k | R_0402 | R1, R4 |
| 2 | 39 | R_0402 | R2, R10 |
| 1 | 1k | R_0603 | R3 |
| 4 | 1k | R_0402 | R5, R6, R9, R11 |
| 2 | 10k | R_0402 | R7, R8 |
ATmega324PB design files
The KiCad project lives in the yanntalhouarne/PCBs repository on GitHub; these links point at the commit this page was built from.
ATmega324PB: common questions
What microcontroller does the ATmega324PB use?
The ATmega324PB is built around the ATMEGA324PB-ABT, from the AVR/Arduino family.
How big is the ATmega324PB PCB?
The ATmega324PB measures 43.3 × 40.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ATmega324PB?
46 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the ATmega324PB design files?
From the yanntalhouarne/PCBs repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ATmega324PB design in my own project?
The repository has no license, so all rights stay with yanntalhouarne. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ATmega324PB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in PCBs
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k