L298 motor driver
yanntalhouarne·PCBs·L298-isolated-DCmotor-driver/L298-motor-driver/L298_motor_driver/L298_motor_driver.kicad_pcb
About the L298 motor driver PCB
L298 motor driver is an open source PCB design by yanntalhouarne, published on GitHub. It is a 2-layer board measuring 47.8 × 43.7 mm, with 55 components from 31 distinct parts.
Other key parts include the TLE4275, RT8279GSP, DRIVER-L298P(SOIC20), ISO7420EDR and ROE-0505S. By type, the board carries 21 capacitors, 10 diodes, 8 ICs, 7 resistors, 5 connectors and 2 inductors.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
My PCB files (KiCAD and Gerber) for a few of my boards.
A motor driver board bsed on the LN298 H-bridge chip. It can take a li-po battery as input with a xt-60 connector or it can be powered with a power supply. Input volatage ratings are printed on the back side of the board. The control inputs are optically isolated. The board offers a 5V isolated output to power the controller board.
Main components on the L298 motor driver
L298 motor driver bill of materials (BOM)
55 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLE4275 | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U1 |
| 1 | RT8279GSP | SOIC127P600X175-9N | U2 |
| 1 | DRIVER-L298P(SOIC20) | SOIC20G-1.27-16X11MM | U3 |
| 3 | ISO7420EDR | SOIC-8_3.9x4.9mm_Pitch1.27mm | U4, U5, U6 |
| 1 | ROE-0505S | Pin_Header_Straight_1x04_Pitch2.54mm | U7 |
| 1 | ACS712ELCTR-20A-T | SOIC-8_3.9x4.9mm_Pitch1.27mm | U8 |
| 1 | Screw_Terminal_1x06 | Pin_Header_Straight_1x06_Pitch2.54mm | J1 |
| 1 | CONN_01X05 | Pin_Header_Straight_1x05_Pitch2.54mm | J2 |
| 1 | VBAT | XT60 | J3 |
| 1 | ENA / IN1 / IN2 | Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | ENB / IN3 / IN4 | Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
| 1 | DPDT | JS202011SCQN | S1 |
| 1 | Thermistor_NTC | R_0402 | TH1 |
| 8 | D | D_SMB_Handsoldering | D1, D2, D3, D4, D8, D9, D10, D11 |
| 1 | B550A | D_SMB_Handsoldering | D6 |
| 1 | LED | LED_0603 | D7 |
| 1 | 535-12531-1-ND | L_0603_HandSoldering | L1 |
| 1 | L | INDUCTOR_744770115 | L2 |
| 1 | .033u | C_0603 | C1 |
| 1 | 4.7u | C_1206 | C2 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1u | C_0603 | C3, C18, C19 |
| 1 | 10u | C_0805 | C4 |
| 1 | 10n | C_0603 | C5 |
| 8 | .1u | C_0402 | C6, C7, C8, C9, C10, C11, C13, C17 |
| 2 | 22u | C_0603 | C12, C15 |
| 1 | 82p | C_0603 | C14 |
| 2 | .1u | C_0603 | C16, C21 |
| 1 | 1n | C_0603 | C20 |
| 5 | R | R_0402 | R1, R2, R3, R4, R5 |
| 1 | 47k | R_0402 | R6 |
| 1 | 1k | R_0402 | R7 |
L298 motor driver design files
The KiCad project lives in the yanntalhouarne/PCBs repository on GitHub; these links point at the commit this page was built from.
L298 motor driver: common questions
How big is the L298 motor driver PCB?
The L298 motor driver measures 47.8 × 43.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the L298 motor driver?
55 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the L298 motor driver design files?
From the yanntalhouarne/PCBs repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the L298 motor driver design in my own project?
The repository has no license, so all rights stay with yanntalhouarne. Use it as a reference, and ask the author before reusing the design.
More boards in PCBs
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k