PCB design

Yashas022·PCB_design·My_project/SPo2/spo2.kicad_pcb

PCB design layout, top view — open source AVR/Arduino board by Yashas022

About the PCB design

PCB design is an open source AVR/Arduino PCB design by Yashas022, published on GitHub. It is a 2-layer board measuring 72 × 48 mm, with 14 components from 7 distinct parts.

Its main chip is the Arduino_Nano_v2.x, from the AVR/Arduino family. Other key parts include the SSD1306. By type, the board carries 4 resistors, 3 switches, 3 capacitors, 2 ICs, 1 module and 1 diode.

It belongs with the displays & leds designs in this gallery.

From the project

A compact, educational pulse oximeter PCB based on the Arduino Nano (ATmega328P). The board integrates an I²C pulse oximeter sensor module (MAX30100/MAX30102), an SSD1306 OLED display, 3-button navigation, power regulation, and an LED alarm indicator onto a single prototyping PCB

A compact, educational pulse oximeter PCB based on the Arduino Nano (ATmega328P). The board integrates an I²C pulse oximeter sensor module (MAX30100/MAX30102), an SSD1306 OLED display, 3-button navigation, power regulation, and an LED alarm indicator onto a single prototyping PCB designed in KiCad.

text Myproject/ └── SPo2/ ├── hardware/ │ ├── footprints/ # Custom footprint libraries (.pretty / .kicadmod) │ ├── gerbers/ # Fabrication output files │ ├── spo2.kicadpro # KiCad project file │ ├── spo2.kicadsch # Schematic file │ └── spo2.kicadpcb # PCB layout file ├── docs/ │ ├── schematic.pdf #…

Main components on the PCB design

PCB design bill of materials (BOM)

14 components, 7 distinct parts.

QtyPartRefs
1
~
U1
1
SSD1306
U2
1
Arduino_Nano_v2.x
A1
3
SW_Push
SW1, SW2, SW3
1
LED
D1
3
100n
C1, C2, C3
4
1K
R1, R2, R3, R4

PCB design design files

The KiCad project lives in the Yashas022/PCB_design repository on GitHub; these links point at the commit this page was built from.

PCB design: common questions

What microcontroller does the PCB design use?

The PCB design is built around the Arduino_Nano_v2.x, from the AVR/Arduino family.

How big is the PCB design?

The PCB design measures 72 × 48 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB design?

14 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB design design files?

From the Yashas022/PCB_design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB design design in my own project?

The repository has no license, so all rights stay with Yashas022. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards