CAN-Transceiver with-PIC18F2580-and-MCP2551

yasir-khilji-64·CAN-Transceiver-with-PIC18F2580-and-MCP2551·V2.0.0/Dev Board/Dev Board.kicad_pcb

CAN-Transceiver with-PIC18F2580-and-MCP2551 PCB layout, top view — open source PIC board by yasir-khilji-64

About the CAN-Transceiver with-PIC18F2580-and-MCP2551 PCB

CAN-Transceiver with-PIC18F2580-and-MCP2551 is an open source PIC PCB design by yasir-khilji-64, published on GitHub. It is a 2-layer board measuring 50 × 80 mm, with 40 components from 24 distinct parts.

Its main chip is the 9321284, from the PIC family. Other key parts include the 9758569 and 2296057. By type, the board carries 13 capacitors, 9 diodes, 7 connectors, 6 resistors, 3 ICs and 1 crystal.

It belongs with the rf & radio and dev boards & breakouts designs in this gallery.

CAN-Transceiver with-PIC18F2580-and-MCP2551, from the project README
From the project README

Main components on the CAN-Transceiver with-PIC18F2580-and-MCP2551

975856993212842296057

CAN-Transceiver with-PIC18F2580-and-MCP2551 bill of materials (BOM)

40 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
9758569
MCP2551-I-SN
Microchip Technology
U1
1
9321284
PIC18F25K80_ISS
Microchip Technology
U2
1
2296057
NCP1117-5.0_TO252
ON SEMICONDUCTOR
U3
1
2467724
20MHz
Abracon LLC
Y1
1
2356183
PICKIT4 Conn
WURTH ELEKTRONIK
J1
1
2356155
I2C Conn
WURTH ELEKTRONIK
J2
1
2356155
UART Conn
WURTH ELEKTRONIK
J3
1
2356158
SPI Conn
WURTH ELEKTRONIK
J4
1
2356155
CAN Conn
WURTH ELEKTRONIK
J5
1
1841229
PORT B
WURTH ELEKTRONIK
J6
1
2356160
Analog
WURTH ELEKTRONIK
J7
1
9731075
JP_LED
MOLEX
JP1
1
2463401
MBR0530
ON SEMICONDUCTOR
D1
8
8554595
Green
BROADCOM LIMITED
D2, D3, D4, D5, D6, D7, D8, D9
6
2332842
100nF
AVX
C1, C2, C3, C5, C10, C12
2
2211027
560pF
Yageo
C4, C6
1
3188954
10uF
Yageo
C7
2
2812188
22pF
Wurth Electronics Inc.
C8, C9
2
2065969
100uF
Panasonic Electronic Components
C11, C13
1
2470962
4.7k
Bourns Inc.
R1
Show 4 more
QtyPartRefs
1
1653333
10k
VISHAY
R2
2
9240888
100
Yageo
R3, R4
1
1469968
1M
VISHAY
R5
1
9240918
330
Yageo
R6

CAN-Transceiver with-PIC18F2580-and-MCP2551 design files

The KiCad project lives in the yasir-khilji-64/CAN-Transceiver-with-PIC18F2580-and-MCP2551 repository on GitHub; these links point at the commit this page was built from.

CAN-Transceiver with-PIC18F2580-and-MCP2551: common questions

What microcontroller does the CAN-Transceiver with-PIC18F2580-and-MCP2551 use?

The CAN-Transceiver with-PIC18F2580-and-MCP2551 is built around the 9321284, from the PIC family.

How big is the CAN-Transceiver with-PIC18F2580-and-MCP2551 PCB?

The CAN-Transceiver with-PIC18F2580-and-MCP2551 measures 50 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CAN-Transceiver with-PIC18F2580-and-MCP2551?

40 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CAN-Transceiver with-PIC18F2580-and-MCP2551 design files?

From the yasir-khilji-64/CAN-Transceiver-with-PIC18F2580-and-MCP2551 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the CAN-Transceiver with-PIC18F2580-and-MCP2551 design in my own project?

The repository has no license, so all rights stay with yasir-khilji-64. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CAN-Transceiver with-PIC18F2580-and-MCP2551 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards