HardLabs

PCB-Stuff

Ybot34·PCB-Stuff·weliveinasociety/weliveinasociety.kicad_pcb

PCB-Stuff layout, top view — open source RP2040/RP2350 board by Ybot34

About the PCB-Stuff

PCB-Stuff is an open source RP2040/RP2350 PCB design by Ybot34, published on GitHub. It is a 2-layer board measuring 61.9 × 61.9 mm, with 13 components from 3 distinct parts.

Its main chip is the RP2040_ZERO, from the RP2040/RP2350 family. By type, the board carries 6 switches, 6 diodes and 1 IC.

From the project

its in the name silly

Main components on the PCB-Stuff

RP2040_ZERO

PCB-Stuff bill of materials (BOM)

13 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040_ZERO
RP2040_Zero
U1
6
Keyswitch
S1, S2, S3, S4, S5, S6
6
Diode
D1, D2, D3, D4, D5, D6

PCB-Stuff design files

The KiCad project lives in the Ybot34/PCB-Stuff repository on GitHub; these links point at the commit this page was built from.

PCB-Stuff: common questions

What microcontroller does the PCB-Stuff use?

The PCB-Stuff is built around the RP2040_ZERO, from the RP2040/RP2350 family.

How big is the PCB-Stuff?

The PCB-Stuff measures 61.9 × 61.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB-Stuff?

13 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB-Stuff design files?

From the Ybot34/PCB-Stuff repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB-Stuff design in my own project?

The repository has no license, so all rights stay with Ybot34. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB-Stuff without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards