BluePill-USB-C
yedidia-sisay·BluePill-USB-C
About the BluePill-USB-C PCB
BluePill-USB-C is an open source STM32 PCB design by yedidia-sisay, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 51.3 × 26 mm, with 31 components from 16 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117. By type, the board carries 13 capacitors, 7 resistors, 3 connectors, 3 diodes, 2 ICs and 1 crystal.
It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
An open-source STM32F103C8T development board with **USB-C** power input, designed in KiCad. A modern take on the classic "Blue Pill" form factor — replacing the fragile Micro-USB with a robust USB-C connector and adding ESD protection, power indication LED, and clean breakout headers.
An open-source STM32F103C8T development board with USB-C power input, designed in KiCad. A modern take on the classic "Blue Pill" form factor — replacing the fragile Micro-USB with a robust USB-C connector and adding ESD protection, power indication LED, and clean breakout headers.
Contributions are welcome as I am trying to build a portfolio of good hardware projects, that people can use as a reference when learning and designing there own projects.
Main components on the BluePill-USB-C
BluePill-USB-C bill of materials (BOM)
31 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117 | SOT-223-3_TabPin2 | U2 |
| 1 | 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 3 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 3 | D_TVS | D_SOD-523 | D1, D2, D3 |
| 1 | FerriteBead | L_0603_1608Metric | FB1 |
| 6 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C8, C9 |
| 1 | 10u | C_0603_1608Metric | C5 |
| 1 | 10n | C_0402_1005Metric | C6 |
| 1 | 1u | C_0603_1608Metric | C7 |
| 2 | 27p | C_0402_1005Metric | C10, C11 |
| 2 | 22u | C_0603_1608Metric | C12, C13 |
| 1 | 10k | R_0402_1005Metric | R1 |
| 2 | 5k1 | R_0402_1005Metric | R2, R3 |
| 4 | 1K5 | R_0402_1005Metric | R4, R5, R6, R7 |
BluePill-USB-C design files
The KiCad project lives in the yedidia-sisay/BluePill-USB-C repository on GitHub; these links point at the commit this page was built from.
- Layoutstm32_first.kicad_pcb
- Schematicstm32_first.kicad_sch
BluePill-USB-C: common questions
What microcontroller does the BluePill-USB-C use?
The BluePill-USB-C is built around the STM32F103C8Tx, from the STM32 family.
How big is the BluePill-USB-C PCB?
The BluePill-USB-C measures 51.3 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BluePill-USB-C?
31 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the BluePill-USB-C design files?
From the yedidia-sisay/BluePill-USB-C repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BluePill-USB-C design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which yedidia-sisay chose for the repository.
Can I test firmware for the BluePill-USB-C without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k