Lunakey Macro
About the Lunakey Macro PCB
Lunakey Macro is an open source PCB design by yoichiro, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 100 × 78 mm, with 27 components from 7 distinct parts.
Other key parts include the ProMicro. By type, the board carries 12 switches, 11 diodes, 1 IC, 1 connector, 1 speaker and 1 resistor.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
Lunakey - This is a brand for keyboards designed by Yoichiro Tanaka.
This project has some keyboards designed by Yoichiro Tanaka.
Lunakey Mini is a 40% keyboard which has 44 keys and is splitted to left and right. Each side has 3 rows x 6 columns and 4 keys that are pressed by a thumb. Also, it has an ability to light up by Underglow LEDs on the bottom, an ability to display information by OLED modules and an ability to play a sound by a speaker module. Of course, the column-staggered key layout is the result of deep thinking to fit each finger and each key naturally. Lunakey Mini can assist your PC life everyday.
Main components on the Lunakey Macro
Lunakey Macro bill of materials (BOM)
27 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro_v3 | U1 |
| 1 | Conn_01x03 | StripLED_1side | J1 |
| 1 | PKLCS1212E4001-R1 | SPKR_PKLCS1212E4001-R1 | LS1 |
| 11 | SW_PUSH | CherryMX_Hotswap | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +3 |
| 1 | RESET_SWITCH | ResetSW_1side | SW12 |
| 11 | D | Diode-Hybrid-Back | D1, D2, D3, D4, D5, D6, D7, D8 +3 |
| 1 | 1k | Resistor-Hybrid-Back | R1 |
Lunakey Macro design files
The KiCad project lives in the yoichiro/lunakey repository on GitHub; these links point at the commit this page was built from.
Lunakey Macro: common questions
How big is the Lunakey Macro PCB?
The Lunakey Macro measures 100 × 78 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lunakey Macro?
27 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lunakey Macro design files?
From the yoichiro/lunakey repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Lunakey Macro design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in lunakey
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k