Force feedback vr glove
yoonytunes·force-feedback-vr-glove·PCB/ece445_pcb/ece445_pcb.kicad_pcb
About the Force feedback vr glove PCB
Force feedback vr glove is an open source STM32 PCB design by yoonytunes, published on GitHub. It is a 2-layer board measuring 72.1 × 81.7 mm, with 53 components from 45 distinct parts.
Its main chip is the STM32F446RETx, from the STM32 family. Other key parts include the FT232RL and TLV73333PDBV. By type, the board carries 31 connectors, 7 test points, 7 resistors, 5 capacitors and 3 ICs.
From the project
This branch contains all files and folders related tothe pcb layout and design of the VR glove.
This branch contains all files and folders related tothe pcb layout and design of the VR glove.
1. git checkout pcb ; for switching into pcb branch
2. git pull ; get updated version of remote repo
3a. git add {whatever file you want to add} ; adds specific files
3b. git add . ; this adds all the changes you made
Main components on the Force feedback vr glove
Force feedback vr glove bill of materials (BOM)
53 components, 45 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | TLV73333PDBV | SOT-23-5 | U3 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105133-0031 | J1 |
| 1 | ST-LINK Headers | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | VDD | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | GND | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Port C Headers | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Port A Headers | PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | Boot Header | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | CBUS Headers | PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | Port H Headers | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | NRESET Header | PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | Port D Headers | PinHeader_1x01_P2.54mm_Vertical | J11 |
| 1 | STM32 NRST Header | PinHeader_1x01_P2.54mm_Vertical | J12 |
| 1 | Data Control 1 | PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Data Control 2 | PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | Servo Header 3 | PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | Servo Header 1 | PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | Servo Header 4 | PinHeader_1x03_P2.54mm_Vertical | J17 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Servo Header 2 | PinHeader_1x03_P2.54mm_Vertical | J18 |
| 1 | Servo Header 5 | PinHeader_1x03_P2.54mm_Vertical | J19 |
| 1 | FT232 Data Control Headers | PinHeader_1x04_P2.54mm_Vertical | J20 |
| 1 | 5V Power Header | PinHeader_1x02_P2.54mm_Vertical | J21 |
| 1 | Button Header | PinHeader_1x03_P2.54mm_Vertical | J22 |
| 1 | ADC Headers | PinHeader_1x06_P2.54mm_Vertical | J23 |
| 1 | PWM Header | PinHeader_1x04_P2.54mm_Vertical | J24 |
| 1 | UART/ADC | PinHeader_1x04_P2.54mm_Vertical | J25 |
| 1 | ADC/PWM | PinHeader_1x04_P2.54mm_Vertical | J26 |
| 1 | PWM Header | PinHeader_1x03_P2.54mm_Vertical | J27 |
| 1 | PWN Headers | PinHeader_1x05_P2.54mm_Vertical | J28 |
| 1 | 5V or 3.3V | PinHeader_1x01_P2.54mm_Vertical | J29 |
| 1 | UART Headers | PinHeader_1x02_P2.54mm_Vertical | J30 |
| 1 | Jack-DC | BarrelJack_Wuerth_6941xx301002 | J31 |
| 1 | 5V | TestPoint_Keystone_5019_Minature | TP1 |
| 1 | GND | TestPoint_Keystone_5019_Minature | TP2 |
| 1 | 5V U | TestPoint_Keystone_5019_Minature | TP3 |
| 1 | 5V H | TestPoint_Keystone_5019_Minature | TP4 |
| 2 | 3.3V | TestPoint_Keystone_5019_Minature | TP5, TP7 |
| 1 | 5V J | TestPoint_Keystone_5019_Minature | TP6 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 3 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5 |
| 1 | 100uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 1.5k ohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 6 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R2, R3, R4, R5, R6, R7 |
Force feedback vr glove design files
The KiCad project lives in the yoonytunes/force-feedback-vr-glove repository on GitHub; these links point at the commit this page was built from.
Force feedback vr glove: common questions
What microcontroller does the Force feedback vr glove use?
The Force feedback vr glove is built around the STM32F446RETx, from the STM32 family.
How big is the Force feedback vr glove PCB?
The Force feedback vr glove measures 72.1 × 81.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Force feedback vr glove?
53 components, from 45 distinct parts. The full bill of materials is listed on this page.
Where can I download the Force feedback vr glove design files?
From the yoonytunes/force-feedback-vr-glove repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Force feedback vr glove design in my own project?
The repository has no license, so all rights stay with yoonytunes. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Force feedback vr glove without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k