DIY SPO2

Youngmills047·DIY_SPO2·DIY_SP02/Hardware/Spo2.kicad_pcb

DIY SPO2 PCB layout, top view — open source AVR/Arduino board by Youngmills047

About the DIY SPO2 PCB

DIY SPO2 is an open source AVR/Arduino PCB design by Youngmills047, published on GitHub. It is a 4-layer board measuring 75 × 53 mm, with 14 components from 7 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the MAX3012 and SSD1306. By type, the board carries 4 resistors, 3 switches, 3 capacitors, 2 ICs, 1 module and 1 diode.

It belongs with the displays & leds designs in this gallery.

From the project

This project is a DIY pulse oximeter built around the MAX30102 sensor, Arduino Nano, and an SSD1306 OLED display. It measures blood oxygen saturation (SpO₂) and heart rate (BPM) in real-time.

This project is a DIY pulse oximeter built around the MAX30102 sensor, Arduino Nano, and an SSD1306 OLED display. It measures blood oxygen saturation (SpO₂) and heart rate (BPM) in real-time.

Documentation (wiring diagrams, PCB images, BOM, etc.)

Reads SpO₂ (%) and heart rate (BPM) using the MAX30102 sensor

Real-time display on 0.96" SSD1306 OLED screen

Compact PCB design (KiCad project + Gerbers included)

Main components on the DIY SPO2

DIY SPO2 bill of materials (BOM)

14 components, 7 distinct parts.

QtyPartRefs
1
MAX3012
U1
1
SSD1306
U2
1
Arduino_Nano_v3.x
A1
3
SW_Push
SW1, SW2, SW3
1
LED
D1
3
100n
C1, C2, C3
4
1k
R1, R2, R3, R4

DIY SPO2 design files

The KiCad project lives in the Youngmills047/DIY_SPO2 repository on GitHub; these links point at the commit this page was built from.

DIY SPO2: common questions

What microcontroller does the DIY SPO2 use?

The DIY SPO2 is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the DIY SPO2 PCB?

The DIY SPO2 measures 75 × 53 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the DIY SPO2?

14 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the DIY SPO2 design files?

From the Youngmills047/DIY_SPO2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DIY SPO2 design in my own project?

The repository has no license, so all rights stay with Youngmills047. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DIY SPO2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards